explosion-proof steam Chamber Oven FOR screen printing industry 8419899090

Thermostatic oven :top-bottom temperature tolerances in the oven inside , determine the price of the oven is different.

1.  Constant temperature baking box Technical parameter:

1. Hot air circulation drying oven TM-152012EP trolley oven;
Studio size: H height*W width*D depth=1500*2000*1200mm
Overall dimensions: H height * W width * D depth=2180*2620*1800mm (including the size of the circulating fan and the control box)
2. The shell is made of ST14 cold-rolled steel plate, Q235 angle steel and channel steel welded, and the surface is sprayed with high-temperature resistant metal hammer pattern baking paint.
3. The working room is made of bent and welded SUS304 stainless steel plate, and reinforced with stainless steel frame. shell and work
The chambers are filled with aluminum silicate fiber for insulation, and the thickness of the insulation layer is 100mm to ensure its insulation performance.
4. The door opening method is a double door, one on the left and one on the left, and two cast steel door hinges are installed on each door, and the door lock is fixed by a rocker handle.
Strengthen the sealing of the door. The channel steel is embedded in the position where the hinge and door hasp are installed, and the channel steel is welded with the entire oven frame
Come on, make sure to be strong. There are 2 trolleys inside the studio, the trolley size: H1450*W750*D1100mm, each cart
The car is divided into 10 layers, equipped with 10 punched shelves, each layer can bear 50KG, and the shelves can be pulled out.
5. Two sets of explosion-proof steam heaters are respectively installed in the air ducts on the left and right sides of the studio, and the door is separated by high-temperature resistant sealing strips.
Heat, insulation effect is good.
6. Temperature range: It can be adjusted arbitrarily within normal temperature~120ºC, the average heating rate is about 1~2ºC per minute, working voltage:
380V/50Hz.
7. There are left, right and top circulating air ducts in the working room, equipped with a strong pressure blast circulation system, horizontal and vertical air supply on the left and right.
The hot air circulation mode is that the hot air is blown out from the left and right sides of the studio, and then returned from the air duct on the top of the studio, passing through the top volute
And the centrifugal fan blades are pressurized and then blown into the left and right side air ducts, so as to circulate repeatedly to achieve temperature uniformity in the working room
(The left and right sides of the studio are perforated plates, which are conducive to the uniform entry and exit of circulating air).
8. An adjustable exhaust valve is installed on the top of the oven to facilitate the discharge of waste gas and water vapor. Explosion-proof high temperature resistant long shaft blower motor
Installed on the top of the cabinet, blower power: 750W*2 units, working voltage: 380V/50Hz.
9. The electrical control box and components are installed on the left side of the box. The temperature control adopts LED digital display intelligent temperature controller, and the automatic control
Temperature and constant temperature (automatic P.I.D calculation), different temperatures can be set according to different process requirements and automatically rise and constant temperature;
The temperature control accuracy of the instrument is ±1°C, and the temperature control uniformity is ±2.5%. The power regulator adopts high-power SSR solid-state relay output,
Its advantages are: no contact, no noise, no spark, long service life. The low-voltage electrical appliances adopt the French Schneide brand.
10. It is also equipped with an independent over-temperature protection instrument. When the temperature in the oven exceeds the temperature set by the instrument, the over-temperature protection instrument will automatically
At the same time, cut off the heating power supply and send out a buzzer alarm to protect the safety of products and equipment.
11. The oven is equipped with sound and light alarms. When the baking and heating process is over, the oven will automatically stop heating, and at the same time the red sound and light alarm
The alarm will automatically alarm to prompt the end of the work process (the alarm can be manually selected to be on or off).
12. Both the intelligent temperature controller and the over-temperature protector are measured by stainless steel armored K-type thermocouple (7.5*250) temperature-sensing probes.
Temperature sensitive, accurate, long service life. The temperature probe is installed in the air duct of the box to prevent the car from being damaged by collision.
13. The total circuit is equipped with overload, short circuit and leakage protectors, and the fan control circuit is equipped with overload, overheating and phase loss protection
The device plays an automatic protection role when the motor is abnormal.
14. Delivery date and payment method: 50% of the advance payment will be delivered within 30 days, and the balance should be paid before delivery.
15. Quotation: FOB price 30575USD, factory preferential price: 28575USD (factory price).
16. Warranty period: The whole machine is guaranteed for one year. During the warranty period, all free maintenance includes parts replacement (except man-made damage), and lifetime maintenance
After the warranty period, the cost of parts and components will be charged appropriately.

Spraying industry oven with trolly groove Customer visit:

DOUBLE DOOR Industrial oven Fit 2 pcs Thousand layer cart Shipping picture:

You might also like:

 welding electrodes manufacturing plant oven with galvanized inner

Payment Terms: TT/LC/ Western Union