Specification: Phi 46*90

Classification: transfer

Finish: galvanized

Material: stainless steel

Functional characteristics: metal and glass in the form of modern architecture, the maximum savings of indoor space, permeability is strong

Uses: mainly used for the installation of glass curtain wall, glass curtain wall and steel structure combined together. The products are mainly used in building, traffic, hardware, construction sites, such as the installation of the glass curtain wall, field, cage type coaxial system, installation connecting rod, supporting base and a guide rail structure, to be used to transfer.

The outer sleeve of the curtain wall adapter is a screw, and the inner sleeve of the screw sleeve is fixed with a groove, and the screw cap is fixed in the groove. This design is suitable for the transfer of the right and left side of the project node, which can effectively prevent the transfer of the force rotation.

Installation of curtain wall adapter:

1 check the curtain wall connecting piece connecting sleeve is connected with the steel structure of the connection, the connection of the match, not match the adapter, please contact our company, check the curtain wall connecting the head screw thread and connecting sleeve thread is clean, in good condition.

2 the connecting sleeve is screwed into the back end of the curtain wall with a long thread, and the end of the connecting sleeve is connected with the end of the connecting sleeve, and the connecting sleeve is screwed to the end of the screw.

3 the end face of a connecting bar with a standard head of the other end is connected with the end of the reinforcing bar and the connecting sleeve and the end face of the connecting bar.

4 reverse rotating connecting sleeve, so that the connecting sleeve is screwed into the standard bar head of another bar, and the connecting sleeve is screwed to the standard wire head screw.

. in accordance with the specifications of steel will torque wrench to adjust to the rated value, and torque wrench card sleeve at both ends of the reinforced, tighten the arrival of torque wrench rated values.

6 the outer sleeve of the connecting piece is fixed with a screw, and the inner sleeve has a screw groove, and the screw cap is fixed in the groove. This design is suitable for the transfer of the right and left side of the project node, which can effectively prevent the transfer of the force rotation.