Dairy processing machine, buy China Factory milk processing machine yogurt produce line used for processing dairy on China Suppliers Mobile

Product Details

Products Description

Production line introduction:

After centrifugation, standardization, homogenization, sterilization and cooling, the whole process is seamless. This production line project,

customers can choose to do UHT high temperature milk, pasteurized milk, lactic acid bacteria drinks, yogurt drinks, etc.
The packaging is diversified and can be customized according to the demand.

This milk production line produces several types of pasteurized milk products, i.e. whole milk, skimmed milk and standardized milk of various fat contents.

First the milk is preheated and standardized by in line milk fat standardization system. The purpose of standardization is to give the milk a defined, guaranteed fat content.

Common values are 1.5% for low fat milk and 3% for regular grade milk, fat contents as low as 0.1 and 0.5 % is skimmed milk.

Then the standardized milk is homogenized. The purpose of homogenization is to disintegrate or finely distribute the fat globules in the milk in order to reduce creaming.

Homogenization may be total or partial. Partial homogenization is a more economical solution, because a smaller homogenizer can be used.

The milk now is pumped to the heating section of the milk heat exchanger where it is pasteurized. The necessary holding time is provided by a separate holding tube.

The pasteurization temperature is recorded continuously. Pump is a booster pump which increases the pressure of the product to a level at which the pasteurized product cannot be contaminated by untreated milk or by the cooling medium if a leak occur in the plate heat exchanger. If the pasteurization temperature should drop,

this is sensed by a temperature transmitter. A signal activates flow diversion valve and the milk flows back to the balance tank.
After pasteurization the milk continues to a cooling section in the heat exchanger, where it is regeneratively cooled by the
incoming untreated cold milk, and then to the cooling section where it is cooled with ice water. The cold milk is then pumped to the filling machines.

Temperature and pasteurization holding time are very important factors which must be specified precisely in relation to the quality of the milk and its shelf life requirements.

The pasteurization temperature is usually 72 – 75C for 15 – 20 sec. A common requirement is that the heat treatment must guarantee the destruction of unwanted microorganisms and of all pathogenic bacteria without the product being damaged.

Machine Details

Processing flow

Product Paramenters

Model	Capacity	Steam consumption	Power	Weight
GY-X-1MJ	1T/H	20KG/H	1.9KW	560KG
GY-X-5MJ	5T/H	50KG/H	2.5KW	860KG
GY-X-10MJ	10T/H	80KG/H	3.5KW	1060KG

Item	Value	Voltage	Processing Types	Dimension(LWH)
Applicable Industries	Manufacturing Plant, Food & Beverage Factory, Farms, Dairy factory, Milk processing industry	220v/380v	Complete Processing Line	15009001600mm
After Warranty Service	Video technical support, Online support, Spare parts, Field maintenance and repair service

Our Advantages

*It can be designed according to the special requirements of users
*Multiple products can be produced on the same production line
*Application of high technology to save energy consumption
*It can produce high quality products and keep nutrients
*Aromatic substances can be added and mixed precisely
*Extend the shelf life of products
*Large output and small loss

FAQ

Attn:Lebron Ma

GENYOND MACHINERY INDUSTRIAL GROUP LIMITED
SHANGHAI GENYOND TECHNOLOGY CO., LTD
ZHANGJIAGANG GENYOND MACHINERY CO., LTD
Address:Room 1416-1418 Shatian Building NO.587 changshou road Putuo District 200000 Shanghai
TEl: +86 2134796156
Office Mob/WeChat/WhatsApp: +86 18916252295
Official websitel:

Recommend Products