HPT604-BS type is a submersible fuel level transducer suitable for fuel level and depth measurement. It consists of an Germany imported FS piezoresistive sensing element encased in 304SS housing. It’s all stainless steel, the hermetically sealed housing makes it suitable for immersion in most industrial liquids and oils.
This submersible level transducer is designed with a magnetic suction end cap to fix the sensor at the bottom of the tanks or vessels and prevent the sensor shaking in the liquid. Two designs are provided for static and moving fuel tanks separately. This design will eliminate the negative effect of shaking on measurement accuracy.
The HPT604BS incorporates lightning and surge protection utilizes dual arrestor technology, and assures normal work under the input and output short-circuit conditions to prevent reverse connection. And it eliminates both power supply surges and lightning ground strike transients.
Pressure Range | 0-0.05 Bar…..5 Bar / 0-0.5M……..50m fuel level optional (See P1 page description) | ||||||||
Accuracy | ≤ ±0.5%F.S (Typical for 1m to 50m range); ≤ ±1.0%F.S(Typical for 0-1m range) @25 degree C | ||||||||
Long-term Stability | ≤ ±0.2% of span/year | ||||||||
Working Temp. | -30-80℃(non-corrosive medium) | ||||||||
Storage Temp | -40℃~80℃ | ||||||||
Temperature Compensation | 0~50℃ | ||||||||
Medium compatible | Compatible with 304 Stainless Steel | ||||||||
Electrical Wire | 2 Wires | 3 Wires | 4 wires | ||||||
Output | 4-20mA | 1-5V;0-5V | 0-10V | 0.5-4.5V | RS485 Modbus RTU | ||||
Power Supply | 7-30Vdc | 8-30Vdc | 13-30Vdc | 5Vdc±5% | 3.5-36Vdc | ||||
Electrical connection | Fixed cable and water proof IP68 |