qita, buy SYN5302-0277 High sensitivity probe matched with a measurable energy meter on China Suppliers Mobile

Product Details

Fiber optic interface:

*Fiber wavelength: multimode 850nm, 1310 nm; Single mode 1310 nm, 1550 nm.

*Transmission fiber: multimode 50/125 um, 62.5/125 um, 100/140 um; Single mode 8.3/125um, 9/125um, 10/125um.

*Transmission distance: Multi mode 2Km, single mode 20Km. Available for further distances.

*Fiber optic interface types: ST, SC, FC optional, standard ST optical interface.

Power supply and protection:

*Power supply: Industrial standard 24V (+/-5%) power supply, with anti reverse polarity function, industrial terminal interface

Mechanical characteristics:

*Overall dimensions: 146mm * 135mm * 53mm (height * depth * width)

*Shell: IP30 protection level

*Installation method: 35mm guide rail installation

*Net weight: 800g

Work environment:

*Working temperature: -10-70 ℃ (-40~+85 ℃ wide temperature optional)

*Relative humidity: 5%~95% (non condensing)

*Storage temperature: 40-80 ℃

Ordering information:

Product model specifications and introduction unit

CJ-AF11

One analog fiber optic converter, 4-20mA current, single multimode fiber 0-20Km, longer distance, optical interface type ST/SC/FC optional

right

CJ-AF21

Two analog fiber optic converter, 4-20mA current, single multimode fiber 0-20Km, longer distance, optical interface type ST/SC/FC optional

right

CJ-AF31

Three channel analog fiber optic converter, 4-20mA current, single multimode fiber 0-20Km, longer distance, optical interface type ST/SC/FC optional

right

CJ-AF41

Four channel analog fiber optic converter, 4-20mA current, single multimode fiber 0-20Km, longer distance, optical interface type ST/SC/FC optional

right

Power supply and protection:

*Power supply: Dual power redundant input, DC (9-30) V, typical DC24V, power consumption less than 1.5W, with DC1000V voltage isolation and reverse protection function, industrial terminal interface

*Relay alarm output: Fiber optic link fault and power supply fault alarm output, contact capacity: DC48V/1 A, industrial terminal interface

Mechanical characteristics:

*External dimensions: 132mm * 105mm * 52mm

*Shell: IP30 protection level, corrugated aluminum reinforced casing

*Installation method: 35mm guide rail installation

*Net weight: 800g

Work environment:

*Working temperature: -10-70 ℃ (-40~+85 ℃ wide temperature optional)

*Relative humidity: ≤ 90% (non condensing)

*Storage temperature: -40~80 ℃

Contact information: 15359293870

WhatsApp:+86 15359293870

Contact person: KELLY

Email: geabbdcs@gmail.com 386353502@qq.com

Official website:

Bus data interface

*9-pin Sub_ D-jack connector, pin definition in accordance with Profibus DP protocol specifications

*Supports Profibus DP bus standard

*Signal delay (electrical port): ≤ 4Bit

*Communication speed: 9.6Kbps, 19.2 Kbps, 45.45Kbps, 93.75Kbps, 187.5Kbps, 500Kbps, 1.5Mbps, 3Mbps, 6Mbps, 12Mbps

*Equipped with 4000V lightning protection, 1.5A overcurrent protection, and 600W surge protection functions

*Terminal resistance: This device does not come with a terminal resistance, please connect it externally as needed

Power supply and protection

*Power supply: Dual power redundant input, DC (12-36V), typical DC24V, power consumption less than 4W, with reverse protection function, industrial terminal interface

*Relay alarm output: Bus data interface fault alarm output, contact capacity: DC48V/1 A, industrial terminal interface

mechanical properties

*External dimensions: (136x106x54) mm

*Shell: IP30 protection level, corrugated aluminum reinforced casing

*Installation method: 35mm guide rail installation

*Net weight: 800g

work environment

*Working temperature: -10 ℃~70 ℃, optional wide temperature product (-40~85 ℃)

*Storage temperature: -40 ℃~85 ℃

*Relative humidity: ≤ 90% (non condensing)