Product series:

- Channel 32, non-floating DI610

- Channel 32, Group 4 isolation, DI620

- 32 channels, four isolation groups, DI650

48VDC

- 32 channels, four groups isolated, DI621

- 32 channels, four quarantines, DI651

60VDC

- Channel 32, Group 4 isolation, DI622

- 32 channels, four groups isolated, DI652

120VAC

- 16 channels, four isolation groups, DI635

230VAC

- 16 channels, four isolation groups, DI636

24VDC

ABB 16/32 digital output module

- 32 channels, maximum 200mA, short circuit proof, non-floating

DO610

- 16 channels, maximum 2.4A, short circuit proof, group

Each channel is isolated to two channels DO625 <60 V DC

- 32 channels, maximum 0.5A, short circuit proof, group

Product Description:

Each module must have an address installed to enable it

The central unit correctly accesses inputs and outputs.

A detailed description of "addressing" can be found at

Central processing can be found in the "Addressing" chapter

Units and couplers.

The setting of the address must be done through the DIL switch

Located under the slide cover on the right side of the module

Cover (see Figure 5.4-3). When using a central device

07 KR 91, 07 KT 9x as bus owner.

As shown in the table, the module occupies 8 analog inputs

There are eight analog outputs on the CS31 system bus.

If the module is configured to work in 8-bit mode

For input only or for output only, only 8 analog inputs or

The CS31 system bus uses eight analog outputs. in

In this case, an unoccupied input or output address is fine

Used by other modules.

If address DIL switch number 8 is switched to ON, all

The channel ID is changed in units of 08, that is, aw1 is 00

Change to AW n,08, etc. This applies to addresses

Allocation of input and output in two operations

Mode.

Business scope:

PLC,DCS,PAC, industrial computer, programming control PC, frequency conversion system, servo system, human-machine interface HMI, transmission and sensing system and other accessories supply, low-voltage electrical appliances, electrical connection, panel cabinet, power supply, industrial safety SCADA, automation software, information, industrial Ethernet, fieldbus, field instrumentation, wireless communication, low-voltage inverter, High voltage frequency converter, motion control, mechanical transmission, motor, machine vision, sensor, display control instrument, analytical test instrument.

After-sales service:

1. The key customer base is an important part of the survival and further development of the enterprise. Through the return visit and communication of the key customers, the customer demand is gradually improved and the customer satisfaction is improved

2 Due to human factors (self-disassembly, fall or external impact, etc.), irresistible factors (such as natural disasters, etc.) improper storage (rats, liquid infiltration, etc.) caused by computer failure, not free warranty service.

3 Damage to electronic components such as chips and capacitors due to voltage, or failure or damage caused by use in working environments other than those specified in the product manual (such as excessively low ambient temperature; The environment is too wet or dry; Voltage or current instability, etc.), not free warranty service.