Tunnel Infrared Dryer, buy Sports Goods Silicone Shower Cap High Temperature Ink Baking Tunnel Dryer on China Suppliers Mobile

Product Details

Product Description

Basic Info.

Model NO.

TM-IR800y

Atomization

Gas Atomization

Flow

Contra-Flow

Heating Mode

Radioactive

Material Status

Cream, Bulk

Drying Medium

IR Light

Operation Pressure

Atmospheric Pressure

Operational Method

Continuous

Framework

80*40

Heating Zone Dimension

2500 * W 800 *H 1250mm*2

Room Temperature

220 Degrees Max

Motor

No Belt System

Weight

800kg

Usage Range

Textile,Clothes,Garment,Glass,Plastic,etc

Total Power

24.4kw

Heating System

700mm / 1000W /

Lamp Power

1000W*24

Lamp Length

700mm*2

Transport Package

Plywood as Required

Specification

5000 * 800 * 1000mm

Trademark

Tamprinter

Origin

China(Mainland)

HS Code

8443198000

Production Capacity

50sets/Month

Packaging & Delivery

Package Size

238.00cm * 195.00cm * 160.00cm

Package Gross Weight

380.000kg

Product Description

TM-IR800y Textile T-Shirt Screen Printing Infrared Dryer

Type	TM-IR800y
Outside dimensions	L 5000 * W800 * H 1000mm
Heating zone dimensions	L2500 * W 800 "H 250mm * 2
Lamp Power	1000W*24
Lamp Length	700mm*2
Total Power	24.4KW
Temperature	20 to 220 degrees
Control accuracy	1 degree
Weight	800kg
Motor	No belt system

About the frame

overall dimensions (outside): L 5000 * W800 * H 1000mm
2 pcs Plywood 2.65*0.95*1.24m
All are heating zone, no belt system.
The rack all use 80 * 40 thick flat pass welding production, machine feet with 40 * 40 square pass welding production, each section 2.5 meters. The surface process spray treatment(computer white) after rust treatment , the line is assembled body type, machine feet with adjustable foot cups.

About the tunnel
Outside the tunnel, use 1.5mm cold plate bending welding production, surface rust treatment after plastic sprayed (computer white).
Inside the tunnel, the interlayer plate uses 1.0mm stainless steel plate bending production, strengthen with keel.
The insulation layer using 1.0mm stainless steel plate, and the tunnel filled with 100K compacted insulation cotton(T100mm)

About the Drive System
No Drive System.
Line body overall dimensions (outside); L 5000 - w 800 1000mm all heating zones, not into the discharge zone.

1. Framework: 80*40 thick flat chassis used in all pass welding production. HUR embankment 40*40 square pass welding production, each 2.5 m. Surface after rust treatment spray (computer white), line body is assembled, machine feet oven can be with adjustable foot cups:

2. Oven: heating zone dimensions:. 1. 2500 * W 800 *H 1250mm * 2 part;
outside of the oven, the gall bladder using 1.5mm cold plate bending welding production, surface get rust treatment sprayed (computer white).
liner sandwich plate is using 1.0mm stainless steel plate bending production, strengthen the internal filling-keel. using 1.0mm lower inner insulation.
Stainless steel, oven insulation is with 100K cotton insulation to compact and fill (T100mm).

3. supply system:
line body is with no driving force transmission, auxiliary equipment helps to drive;

heating system:

(1)oven: divided into two temperature zones control each temperature zone heating domestic high-quality short-wave infrared lamp heating, each district using 700mm / 1000W / support * 12, a total of 24, the total power 24.4Kw.
(2) thermostat part: Thermostat imported intelligent digital temperature control table temperature, relay output control, total feed electrical box located at the top of the oven heating system with ammeter, voltmeter, total air switch system. oven is without air transport machine.
(3) Insulation: Oven heat insulation not electric insulation. it can insulate the high temperature well.

Technical requirements:
1. oven temperature from room temperature to 220 degrees, must be adjustable thermostat
2. left, right and furnace temperature difference within plus or minus 5 degrees, the control accuracy is 1 degree.

Our services
1. Professional English speaking engineers are online ready for your troubleshooting service. It is reachable in an easy way.
2. We guarantee prompt warranty service for parts repairmen and replacement by international courier. (DHL, FEDEX, UPS, TNT)
3. We can give quick response for on site overseas service requests and offer 7 days' free training and installation service when customer bear the traveling expense including visa, round trip tickets, boarding and lodging at service place.