Product Introduction

This instrument is suitable for determining the flash point and fire point of petroleum products. Principle: Load the sample into the test cup to the specified scribe line. Raise the temperature of the sample rapidly first, then slowly. As the flash point is approached, the temperature rises at a constant rate. The flash point is the minimum temperature at which the vapour on the surface of the specimen flashes with a small test flame across the test cup at specified temperature intervals.

1. Applicable standard: ASTM D92 ISO2592 GB/T3536

2. Heating method: closed electric furnace imported furnace wire

3. Temperature regulation method: high-quality solid-state voltage regulator

4. Sweeping method: automatic sweeping and automatic ignition

5. Heating power: 0～800W adjustable

6. Working power supply: AC220, 240V/50, 60HZ

1. Heat-resistant glass partition is used on the heater to prevent the oil sample from splashing and catching fire;

2, Heating for 20 minutes without operation automatic light machine;

3. If the temperature is too high, it will automatically start air cooling;

4. Digital display heating power, adjustable;

5. Anti-mistouch design, press and hold the switch for 3 seconds to automatically heat;