Solar Inverter, buy Zonergy Residential PV inverter supplier in Brazil on China Suppliers Mobile

Product Details

Residential Single-phase On-grid Inverter for Photovoltaic Power Mercury Series

1. Smart adaptive weak current network serves to avoid frequent grid-connection failures of the product. 2. Independent dual MPPT tracking adaptable to different installation environment. 3. Wide DC voltage range and longer power generation duration. 4. This product supports remote parameter setting, fault diagnosis and software upgrade. 5. This product with a variety of monitoring modes supports RS485, Wi-Fi/Ethernet/GPRS. 6. IP65 degrees of protection makes the product suitable for various harsh application environments.

Specification

Technical parameters	MER 3680TL-S1	MER 5000TL-S1	MER 6000TL-S1
input (DC)
maximum panel input power recommended	4900 Wp	7500 Wp	9000 Wp
maximum DC power of single channel MPPT	2400 W	3000 W	3150 W
maximum input voltage	600 V
start-up input voltage	120 V
rated input voltage	360 V
MPPT voltage range	90 V-550 V
full load DC voltage range	165 V-500 V	175 V-500 V	250 V-520 V
number of independent MPPT	2
number of DC inputs	1/1
maximum Input current	13 A/13 A
maximum short circuit current	18 A /18 A
output (AC)
rated output power	3680 W	5000 W	6000 W
maximum output current	16 A	25 A	27.3 A
nominal grid voltage	L/N/PE, 220 VAC, 230 VAC, 240 VAC
nominal AC voltage range	180 VAC-276 VAC ( according to local standard )
rated grid frequency	50 Hz/ 60 Hz
grid frequency range	45 Hz-55 Hz/54 Hz-66 Hz ( according to local standard )
active power adjustable range	0~ 100%
total harmonic component (current)	<3%
Power Factor	1 (+/-0.8 adjustable)
efficiency
maximum efficiency	97.60%	97.80%	98.00%
European weighted efficiency	97.20%	97.30%	97.30%
MPPT efficiency	>99.9%
protection
insulation impedance detection	available
DC reverse connection protection	available
ground fault monitoring	available
over-current protection	available
DC switch	available
battery soft start protection	available
AFCI protection	optional
general parameters
ambient temperature range	-30 ~ + 60 ℃ (Rating reduction occurs when the ambient temperate rises above 45 ℃.)
stand-by loss	<10 W
topology	no transformer
degrees of protection	IP65
Relative Humidity range allowed	0~ 100%
communication	RS 485, Wi-Fi/GPRS (optional)
protection level	Class I
maximum altitude for product operation	2000 m
connection mode of current sensor	external
noise	<29 dB
weight	11 kg
cooling mode	natural cooling
dimension（mm）	380380150
display	LCD & APP
warranty	5 years (extendable)
standard
EMC	EN 61000-6-1 EN 61000-6-3
safety regulations and standards	IEC62109-1, IEC62109-2

Note：Technical parameters listed hereunder are for reference only. Actual parameters shall be subject to products shipped.