Product Details

AMC16Z-FAK Multi-circuit AC Data Center Energy Meter

AMC16Z series AC precision power distribution monitoring device is specially designed for data center server power management. The device is designed exquisitely and can provide A + B 2 incoming and 96 outgoing electrical parameters, the input and output switch, and the state of the lightning protection device with real-time monitoring. All alarm thresholds of measurement channels can be set separately. Over-outgoing triggers system acoustical warning immediately. A highly integrated monitoring loop is realized in the volume of traditional instruments.

● Monitoring: AC Outgoing Branch Circuits Multi-metering (1-phase & 3-phase)

● Measurement: Voltage, Current, Frequency, Active Power, Reactive Power, Power Factor and etc

● Power Quality: 2nd~31st&Total Harmonic

● Communication: RS485 (MODBUS-RTU)

● Rated Voltage: 220~264Vac L-N

● Rated Current: 50mA AC (via -/50mA CTs)

● Standard&Certificate: CE; IEC; LVD

Dual AC Outgoing Circuits Monitoring

● A+B Dual-side independent AC Circuits Monitoring

● Full Electrical Parameters Monitoring

● Outgoing Branch Circuits Multi-metering

Multiple Branch Circuits Metering

● Both 1-phase&3-phase Metering

● Max 36 circuits 1-phase

● Max 12 circuits 3-phase

● Mixed 8 circuits 3-phase and 12 circuits 1-phase for example

Power Quality Analysis

● 2nd~31st Harmonic

● Total Harmonic

Switch On/Off Status Detection

● A+B Dual Side

● 48-channel of DI (Digital Input)

1. Function Overview

Function	Description
Measurement(Common)	AC kWh, kVarh, Active Power, Reactive Power, Current, Voltage, Power Factor, Apparant Power, Frequency, Zero ground voltage, neutral line current
Measurement(Power Quality)	total harmonic content (THD), 2-31 harmonics
Temp.&HumidityMonitoring	Tempeatrue Monitoring Range: -40℃～+99℃ Humidity Monitoring Range: 20%～90%
Accuracy	Voltage/current/active power/active energy level 0.5, reactive power/reactive energy level 1
Communication	RS485 Interface (MODBUS-RTU protocol)
DI(Swtich Input)	48-channel DI (Digital Input); dry contact

2. Main Parameters

Parameter	Description&Value
Voltage Input	Rated Voltage	3x220~264Vac L-N
Voltage Input	Reference Frequency	45~65Hz
Current Input	Rated Current	50mA AC (via -/50mA CTs)
Power Supply	Source from	Power supply by AMC16Z-ZA;DC 12-24V when used alone
Installation	DIN-rail	35mm standard DIN-rail Installation
Phase Wiring	1P2W&3P4W	1-phase 2-wire&3-phase 4-wire
Safety	Insulation	All terminals and the insulation resistance between the conductive pieces not less than 100MΩ
Safety	Withstand voltage	A-channel voltage and current signal // B-channel voltage and current signal // other ports meet AC2kV 1min between pairs, leakage current should be less than 2mA, no breakdown or flash over phenomenon.

3. Environment

Condition	Description&Value
Temperature	Operating Temperature: -20℃～+55℃; Storage Temperature: -40°C ~+70°C
Humidity	≤95%RH,no condensation,without corrosive gas
Altitude	≤ 2000m

PIN/Terminal Overview of AMC16Z-FAK48

Voltage&Current Input Wiring of AMC16Z-FAK48 (Demo for A side partial wiring)