Climatic Chamber, buy 220V High Low Temperature Test Chamber With 1.5mm Steel Plate on China Suppliers Mobile

Product Details

Features:

1. High-texture appearance, the surface handled through the matte stripes, and use of planar non-reactive handles, easy to operate, safe and reliable.

2. Rectangular complex glass window can be viewed the testing sample, windows with anti-sweat heater device that prevents water vapor condensation, and high-brightness PL light.

3. Double-insulated airtight container, which can effectively isolate the internal temperature of leakage.

4. With an external water supply system can be easy to supply water and automatically reuse. 5. Compressor circulatory system from French "Taikang", more effective removal of oil between the condenser and the capillary and use environmentally refrigerants (R23, R404, R507).

6. Controller imported LCD display screen can be displayed measuring values and setting the value and time.

7. Controller with multi-segment program edited, temperature and humidity can be controlled quickly (OUICK) or slope (SLOP).

8. Built-in mobile pulley easy to move and has a strong positioning screw fixed position.If you need more models about our test equipment, please reference our chamber-testing（.）com

Control:

English LCD display LCD touch-panel, the screen on the input data, and programmable temperature and humidity, backlight adjustable 17, curve, curve of setting/display value. Can display a variety of alerts, failure occurs through the screen display, eliminating failures, eliminate misuse. Multi-PID control functions, sophisticated monitoring functions, and the data displayed on the screen.

Power	3∮ AC380V 50Hz	Weight	360kg/380kg
Interior size	607550 /506050	Exterior size	110167110/108167120
Customized size	acceptable	Cooling type	Water cold
Temperature range	--70℃ ～150℃	Humidity range	None
Temp.& humidity control fluctuation	≤±0.5℃,	Indication resolution	0.01℃,
Temp.& humidity Uniformity	≤±1.5℃, (Put 9 sensor into inner chamber with 9 different location to get uniformity )
Heat up&Cool down time	≤5℃/min for heating and cooling
Chamber materials	SUS#304 stainless steel for Inner chamber with thickness 1.5mm Steel plate for external chamber with thickness 1.5mm
Insulation materials	Rigid polyurethane foam + ultrafine glass fiber with thickness of 100mm
Door	Hinged door, single door open in the central cabinet ( the front of the chamber) Heat distribution on the door (automatic adjustment) anti-frost, anti-condensation insulating glass observation window Door electric equipment (automatic adjustment) anti-frost, anti-condensation device Preparation inside the door lights (LED longevity and efficient light source)
Accessories	Communication interface: RS232 Test hole: diameter 50mm 1 pieces (size can be customized) Observation window: Tempered glass (size can be customized) One light: 9 w/AC220V Foot wheel: four castor, four balance goblet Sample shelf: stainless steel rack 2 pieces In the total bearing weight (bottom and rack combined) no more than: 200 kg
Control panel	Controller+ operation button+over heating protection device +RS232 and USB interface

Air Circulation&

Drain system

(1) Centrifugal fan & imported motor

(2) Reverse uniflow(air flow direction)

(3) Flow-throws wind

(4) Inner air circulation fan, wind channel and stainless steel cycle fan, through the top window and air diffuser, the wind will out uniformly from the top, which could reach the purpose of control temperature uniformly.

(5) Drain system uses swirl type outlet and U-trap deposition unit

Application :

Temperature adaptability test under the condition of rapid change, or gradient for electrical, electronic, instruments and other products or spare parts, particularly applies to environmental stress screening test (ESS)

Environmental stress screening (ESS) refers to the process of exposing a newly manufactured or repaired product or component (typically electronic) to stresses such as thermal cycling and vibration in order to force latent defects to manifest themselves by permanent or catastrophic failure during the screening process. The surviving population, upon completion of screening, can be assumed to have a higher reliability than a similar unscreened population.

ESS can be performed as part of the manufacturing process or it can be used in new product qualification testing.

ESS Testing Purpose:

Testing at the physical environmental conditions (shock, vibration, temperature, altitude, humidity, etc.) that simulate those encountered over the operational life of the component. Random vibration and temperature cycling have proven to be the most successful forms of ESS in terms of effective flaw precipitation.