API 602 Forge steel wedge gate valve
Contact: Email: zipopvf@163.com Wechat: zipo2019; QQ: 2191417589; Mobile: 18081659672
Please inform us of the accurate nominal size, pressure class, medium, temperature, material, actuator and other parameters, before consulting or purchasing the product. Thanks!
There are three types of bonnet design for forged steel flange gate valves.
The first is a bolt bonnet. According to this design, the valve body and bonnet are connected by bolts and nuts with spiral wound gasket (316SS plus flexible graphite). Metal ring connection can also be used when customers have special requirements.
The second design form is welded bonnet. The valve body and bonnet are connected by thread and sealed by full welding. When customers have special requirements, full penetration connection can also be used.
The third type is pressure self tightening bonnet. The valve body and bonnet are connected by thread, and the internal pressure self sealing ring is used to seal the valve.
Models: Z41Y or Z41H, Z11Y or Z11H, Z6Y or Z61H
Nominal diameter: NPS1/2 to NPS3
Nominal pressure: 150LB to 2500LB
Connection mode: flange connection; butt welded connection, Socket Welded connection, and Threaded connection
Operation mode: Manual or Motor or Pneumatic
Function: open or close the medium
Material: forged carbon steel A105, LF2, forged stainless steel 304, 316, F51
Medium: water, oil and steam
Structural features:
1. Full bore or reduced bore;
2. Rising stem with bracket;
3. Packing sleeve with self-aligning at both ends;
4. Bolted bonnet, threaded seal welded bonnet or self sealing bonnet with spiral wound gasket;
5. Body back sealing;
6. Socket welding ANSI / ASME B16.11;
7. Threaded end (NPT end) according to ANSI / ASME B1.20.1.
8. Flange connection ANSI / ASME B16.5 (welding flange)
Manufacturer: ZIPO VALVE & PUMP CO., LTD
