Main Products: environmental test chambers ,climatic test chamber ,Vibration Shaker ,Industrial heating oven ,salt spray chamber ,shock tester ,salt spray chamber
Pneumatic Vertical Impact Shock Test Bench Half Sine Wave
Negotiable /Bag
Min.Order:1 Bag
Guangdong ALI Testing Equipment Co,.Ltd
Business license
Business Type: Manufacturer
Dongguan Guangdong ChinaMain Products: environmental test chambers ,climatic test chamber ,Vibration Shaker ,Industrial heating oven ,salt spray chamber ,shock tester ,salt spray chamber
Temperature Humidity And Vibration Composite Environment Tester For Battery
Automotive Military Impact Temperature And Humidity Vibration Testing Machine
Operating temperature 500℃ high temperature oven intelligent touch screen
Drop Weight Impact Testing Machine , Plastic Pipe Drop Weight Testing Machine
Product Details
Product description:
series pneumatic vertical shock test system is featured with advanced design, high degree of automation and reliability, simple operation and convenient maintenance. The system meets the requirements of both shock and bump test, can perform conventional half-sine wave, post-peak sawtooth wave, trapezoid wave and other waveform shock tests.If you need more models about our test equipment, please reference our chamber-testing（.）com
Pneumatic drive, simple structure and high reliability, without hydraulic leak risk.
Maximum shock rate up to 120 times / min.
Impact testing for small pulse lower to 0.3ms
Shock testing machine with high acceleration is up to 3000g
It can easily realize large shock pulse width and small overload test.
With a fast shock rate comparing to motor or hydraulic driven bump table, it has higher reliability and better bump waveform.
The speed and rate of shock can be easily controlled by adjusting the gas pressure.
IPS-2000 shock control and measurement system can perform manual shock, continuous shock (bump test), single shock, and interval shock.
Built-in brake mechanism ensures the safety of operation in any situation.
Technical Specfications:
Model Parameters | GS
| GS -15 | GS -25 | GSKA -50 | GS -100 | GS -200 | GS -400 | GS -600 | GS -800 | GS -1000 | GS -2000 | |
| Rated Load (kg) | 5 | 15 | 25 | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | 2000 | |
| Table Size (mm) | 150× 150 | 200× 200 | 300× 300 | 500× 500 | 600× 600 | 800× 600 | 800× 800 | 1000× 800 | 1000× 1000 | 1200× 1200 | 1500× 1200 | |
| Peak Acc. (G) | Half-Sine | 5-2.5k | 5-2k | 5-1500 | 10-750 | 10-600 | 10-450 | 10-400 | 10-300 | 10～300 | 10～250 | 10～150 |
Post-Peak Sawtooth | 10-200 | 10-100 | 10-50 | |||||||||
| Trapezoid | 15-200 | 15-100 | 15-60 | 15-50 | ||||||||
| Pulse Duration (ms) | Half-Sine | 0.5～40 | 1～40 | 06～60 | 1.5～60 | 2～60 | 2.5～60 | 3～60 | 3.5～60 | 4～60 | 4.5～60 | 6～60 |
Post-Peak Sawtooth | 3～18 | 6～18 | ||||||||||
| Trapezoid | 3～18 | 6～18 | ||||||||||
| Bump Waveform | Half sine wave | |||||||||||
Bump Peak Acceleration (g) | 4 ~150 | 5～100 | ||||||||||
| Bump Pulse Duration (ms) | 2～30 | 3~30 | ||||||||||
| Overall Dimension (mm) | 1000× 1000× 2100 | 1200× 1000× 2200 | 1400× 2300 | 1600× ×2300 | 1700× ×2300 | 1700× ×2300 | 1900× ×2450 | 1900× ×2450 | 2000× ×2450 | 1900× ×2550 | 2200× ×2550 | |
| Weight (kg) | 1300 | 2300 | 3000 | 4000 | 4500 | 4500 | 5000 | 5200 | 5600 | 6200 | 7300 | |
Bump Rate (Times/Min) | 10~120 | |||||||||||
| Power | AC220V±10%,50Hz | |||||||||||
| Air Source | ≤0.8Mpa | |||||||||||
| Working Environment | Temperature range 0 ~ 40℃; Humidity ≤ 80%, non-condense | |||||||||||
| Standards | MIL-STD-810F IEC68-2-27 UN38.3 IEC62281 IEC62133-2 UL2054 IEEE1625 SAEJ2929 IEC62660-2 ISO12405-3 UL2580
| |||||||||||
Customer Support Services:
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
Contact Supplier
You May Like
New Products
Recommended Products
Find Similar Products By Category
Facebook
X
Pinterest
Linkedln