TMR Mixer

MIXING DEVICES

horizontal tmr mixer Features

1.Augers number is 1 vertical cutting mixing auger.

2.Auger transmission is by 2 planetary angular reduction gears .

3.The 1st speed of two speed gearbox mixing auger is 19,78 rpm.

4.The 2nd speed of two speed gearbox mixing auger is 29,67 rpm.

2. CUTTING DEVICES

horizontal tmr mixer Features

1.There are 9 pieces of knives on the auge.

2.The numbers of manually operated counterblades are 2.

3.The tungsten reinforced knives are optional

3.  DISCHARGE CONVEYOR

Features

1.  Front discharge doors are on both sides.

2.  The front discharge by PVC belt, rear discharge by PVC belt, rear discharge door on both sides are optional.

3.  Front discharge door is on the right side and rear discharge door is on the left side.

4.  MANUAL COUNTERKEIVES

horizontal tmr mixer Features

1.It is distributed on both sides of the box in diagonal form.

2. It forms resistance cutting with the moving knife on the agitator to improve the cutting speed of materials. 3. According to the material and load condition, there are four fixed positions, which can change the cutting resistance and speed

5.MECHANICAL TRANSMISSION

Features

1. The tractor power output shaft directly drives shaft, gearbox and auger to minimize power loss. 2.Gearboxes are connected by universal shaft, which is simple, compact and easy to maintain.    3.The auger is directly connected to the gearbox in the form of flange, which is stable and firm.

6.HIGH EFFICIENCY GEARBOX

Features

1. A shiftable, 2-speed gearbox option allows for reduced input horsepower and auger speed for easier starting and mixing, even with smaller tractors.

2. The gearbox is specifically designed to provide long life and reliability under heavy- duty use and in the most difficult mixing conditions.

7.HYDRAULIC SYSTEM

Features

1.  No additional pumping stations are required.

2.  It has a filter. Only a small amount of hydraulic oil is needed to reduce fuel consumption maintenance cost.

8.SUPPORT FRAME

Features

1. Three-point reinforced support frame to ensure the stability of the machine.

2. Traction bridge, add tires can be a trailed one.

9.ELECTRICAL WEIGHTING SYSTEM

1.  For best use of the potential of the TMR- Unifeed system, a modern and reliable weighing system is necessary.

2. This is why all the models of the GOKE product line have an electronic weighing device formed of three sensors and many indicator instruments with diverse programming possibilities.

Horizontal tmr mixer:

horizontal tmr mixer is a kind of equipment that uses the principle of rapid rotation to achieve uniform mixing.

horizontal tmr mixer product introduction

Features: The materials in the hopper are transported to the upper end of the barrel body through the spiral spindle, and then fall in an umbrella shape and continue to circulate stirring, so as to achieve the purpose of uniform mixing.

horizontal tmr mixer Function: with automatic operation timing, overload protection, feeding limit alarm and other functions; It has the advantages of less space, large capacity, low power consumption, manual saving, convenient control, fast and uniform mixing. Can be widely used in: plastic sheet material, crushing material, plastic particles, plastic old and new material and add color master stirring evenly and other purposes.

horizontal tmr mixer Applicable customers: granulation, plastic granulation, color master manufacturing, plastic modification, recycling processing, large injection molding and other industries.

plough shear mixer working principle The working principle

Use the rapid rotation of the screw to lift the raw material from the bottom of the barrel body from the center to the top, and then fly and scatter in an umbrella shape, back to the bottom, so that the raw material in the barrel up and down stirring, a large number of raw materials can be evenly mixed in a short time.

horizontal tmr mixer product Advantages:

1.automatic operation timing, overload protection, feeding limit alarm and other functions;

2.and has the advantages of less land, large capacity, low power consumption, save labor, easy control, mixing fast and uniform;

3.can be widely used for plastic sheet material, crushing material, powder material, plastic particles, plastic old and new material and add color master stirring evenly and other purposes.

4.suitable for customers: cutting grain, plastic material, color master manufacturing, plastic modification, recycled material recycling processing, large injection molding and other industries.