GCD75-100MC GLE  DR7.8*5.0 B3.0  

Core: Dr7.8x5.0 B3.0

SN: 107H

WIRE: P180-G1-0.XXmm/XX.5Ts(REF)

Terminal

Strength     When the device is pushed in two directions of X and Z with the

force of 5N for 10±2seconds after soldering between copper plate

and the electrode

Reflow test

Change from an initial

value

L : within±20

The specimen shall be subjected to the reflow process under

the above condition 2 times.Test board shall be 0.8mm thick. Base material shall be glass epoxy re

Measurement  The specimen shall be stored at standard atmospheric

conditions for 1 h in prior to the measurement.

Vibration 

Change from an initial

value

L : within±20%

The specimen shall be subjected to a vibration of 1.5mm

amplitude, sweep frequency 10~55~10Hz after vibration for 1

hours

Free fall tesT

Change from an initial

value

L : within±20%

The specimen must be fixed on test board. Then it shall be fallen

freely from 1m height. 10 consecutive time