Appliance:
It is used for testing the mechanical properties of non-metallic materials such as rubber, plastics, wire and cable, textiles, waterproof materials, non-woven fabrics, and metal wires, metal foils, metal sheets and metal rods.
Capacity selection | 500kg/5KN |
Force measurement accuracy | Within ±0.5% of the indicated value |
Display method | Touch screen (with print) |
Unit switching | Kg, lb, N |
Data sampling frequency | 200times/sec |
Test machine resolution | The maximum load is 1/±25000 yards, and the internal and external are not divided, and the resolution is unchanged. |
Load cell | Basic configuration: pull and pressure sensor (maximum load) |
Effective test width | 600mm |
Test speed range | 100-500mm/min stepless speed regulation and 5 speed fixed speed (special test speed can also be customized according to customer requirements) |
Displacement measurement accuracy | Within ±0.5% of the indicated value |
Breakpoint ratio setting | 0 to 99%, users can set appropriate breakdown time according to different materials |
Test bench safety device | Up and down stroke limiting device |
Overload protection | Over 10% of maximum load, automatic machine protection |
Fixture configuration | Set of stretching fixtures |
Host size | 550×400×1820mm |
Host weight | About 150 Kg |
power supply | 220V/50Hz |