World famous brand compressor, 3 minutes delay protection

Ambient humidity LCD display timely

Humidity control set freely, accuracy to ±3%

Continously drainage by external soft tube

Automatic defrosting when the ambient temperature is below 18℃

Timed shut down setting

Humidity sensor malfunction alert

High efficiency, energy saving

Large rear wheels to adapt to various road conditions.

Stainless steel handle, portable push-pull

he pipeline dehumidifier uses evaporator to cool and dehumidify the air, recover the condensation heat of the system, and compensate the heat lost in the air due to cooling and dehumidification. It is an efficient and energy-saving dehumidification method. Has been widely used in national defense engineering, civil air defense engineering, petrochemical vocational, subway station, space purification engineering, laboratory, telecommunication equipment rooms, archives, food, pharmaceutical or film workshop, special glass making, food, wood, etc of dehumidification drying and high wet space desiccant dehumidifier with temperature control requirements of the place.

Product form pipeline temperature regulating dehumidifier structure, various types, pipeline dehumidifier needs to connect the pipeline air, the pipeline to ensure sufficient air pressure when the air activity, pipeline dehumidifier according to the air inlet and outlet method: Forward AIR (GRILLE RETURN AIR), front outlet AIR (hood supply AIR), REAR inlet AIR (flange return AIR), top outlet air (flange inlet air), forward air (GRille return air), top outlet air (flange supply air) three types.

When the indoor temperature and humidity are relatively high, and the indoor cooling load is relatively large, the system operates in the form of cooling and dehumidification. At this moment, the four-way valve is not charged, and the system operates according to the refrigeration method. The second branch of the indoor heat exchanger is the solenoid valve off, the outdoor heat exchanger is the condenser, and the top heat exchanger is the evaporator.

Indoor air is only the top indoor heat exchanger cooling dehumidification, become low temperature and low humidity air back indoors. In this form, can also adjust the outdoor heat exchanger air volume or water to further adjust the cooling capacity and dehumidification capacity, cooling capacity and dehumidification capacity with the increase of outdoor heat exchanger air volume or water volume and rise.

Causes dehumidifier use effect decline reason

In the face of a wide variety of dehumidifier products on the market, when you choose the design is not a group of fog? How to choose the right dehumidifier for yourself? According to the applicable area of the dehumidifier and the required dehumidification area. For example, placed in the living room or bedroom dehumidification, then the general demand for dehumidification area is not particularly large, it is recommended to choose a small energy-saving dehumidifier.

Choose from the length of time required for dehumidification. According to the daily dehumidification volume of dehumidifier to consider, the requirement of dehumidification time is short, should choose a relatively large dehumidification volume machine. Select from the humidity requirements of the area requiring dehumidification. If a large area needs to be dehumidified, it is recommended to select a dehumidifier with large power to achieve fast dehumidification effect. If a small dehumidifier has low power but takes a long time, it is not cost-effective.

1. The manufacture of dehumidifying runner is made of ceramic fiber paper with temperature resistance above 500℃. After the bee shaped runner is made by molding machine, silica gel is coated between the ceramic fibers, so the dehumidifying runner will not have combustion and deliquescence. Because its dehumidification function is to use physical action, rather than chemical action, so it will not produce any harmful chemical substances.

2. The dehumidification principle of rotary dehumidifier is to use the silica gel coated on the runner to physically adsorb the water in the air on the porous synthetic silica gel. Then, in the regeneration area of the runner, the water vapor adsorbed on the silica gel hole is heated and vaporized to the entrance of the alternating heat exchanger to form high temperature and high humidity air. Then it passes through the heat exchanger that has been cooled by the indoor cold and wet air, and the condensation water is discharged due to the difference in dew point.

1. The inlet and outlet of the Rotarydehumidifier shall not be blocked by obstacles, and the air filter network shall be cleaned.

2. Have professional personnel check the wheel dehumidifier regularly: Wheel dehumidifier after long-term use, the unit of electric circuits and control element can have different degrees of aging, serious will cause harm to the units and the human body, regular professional dehumidifier for circuit check to replace aging components, add refrigerant, can prevent aging components on the machine and human body harm, And can keep the dehumidifier in good working condition.

3. The wheel dehumidifier cleans the filter network regularly (about once every two weeks) to maintain the dehumidification, dust removal efficiency and service life of the machine. Wash the filter network with water below 40℃; Use detergent to clean better, wash off the dust, rinse with water, dry after the body. When cleaning the body, gently wipe with a damp cloth; Avoid direct water cleaning, so as not to damage electrical insulation.

4. If the humidity in the air is below 30%, it is too dry and uncomfortable, so the reliable humidity controller is controlled to maintain the range of 50% ~ 60%. When using doors and Windows as close as possible, so that indoor dehumidification effect. The body should be placed flat, not inclined or horizontal, to avoid machine failure or abnormal sound.