New style TM-UV-1660G glass UV ice machine
Glass largest : 1650mm*2200mm* 6mm 40 kg
Glass smallest: 122mm*183mm*3 mm 7kg
Dimensions 10000*2180*1700mm
Roller width 1660mm
Conveying speed 1~5m/min
Power supply: 380V3 phase
Machine power 92KW
Machine weight 2200KG
Group 1
UV curing
UV ultraviolet mercury lamp tube lamp power 12KW/1
Group 2
UV curing
UV ultraviolet mercury lamp tube lamp power 12KW/1
Group 3
UV curing
UV ultraviolet mercury lamp tube lamp power 12KW*4
1KW UV lamp is added on each side for compensation irradiation
2KW infrared preheating lamp
Group 4
Infrared heating leveling
Infrared heating tube lamp power 6 pcs 2KW

Temperature: 200 degree

Machine design principle:
it is designed for lab and mass production. This conveyor system has quiet varyingspeed motor, when the dryer is various loads, speed -adjusting driver and the speed of 
conveyor are Uniform, which is suitable for kinds of items which have different size.

TM-UV-1660G ice machine is a high-intensity ultraviolet light curing machine with modular design. The glass UV ice machine is divided into four independent units, which can be disassembled and combined at will to increase the flexibility of the equipment.
That is, TM-UV-1660G ice machine becomes your ideal product that can be used under any conditions.
1. Introduction of main functions of UV ice machine equipment
``
1. Conveying system: The conveying system is driven by rollers, and the rolling surface is made of high-strength anti-ultraviolet apron, which is resistant to high temperature, has strong flexibility and stable conveying. the
``
2. Infrared heating leveling, using 6 2KW infrared heating tubes, and equipped with a digital display temperature control meter, the temperature is adjustable, and a fully automatic and stable temperature control system. the
``
3. The first group of UV curing and the second group of curing are mainly used for the cracking effect of ice flower ink. The UV intensity of the UV lamp can be adjusted, divided into full-light and half-light control to make the ice flower effect reach the best state. 
4. The third group of UV curing is mainly used for the thorough curing of fish glass ice flower ink, using high-power, focused light source for curing, strong penetrating power, and thorough curing.
``
5. When the UV curing machine is working, the middle energy value is high and the two sides are low. This is caused by the working principle of the UV lamp. Our company added a 1KW UV lamp on both sides of the main lamp for compensation and irradiation, which successfully avoided Eliminate this defect, make the UV lamp work uniformly, and cure the product uniformly. The height of all UV lamps can be adjusted up and down to ensure the uniformity of product flowering.
``
6. This machine adopts the winter preheating function of UV lamps. The UV lamps take a long time to start in winter, and sometimes they cannot be started normally. Also easy to start.
the
7. The spectral range of TM-UV-1660G can reach the main peak of ultraviolet long wave (UVA) 365㎜
2. Performance characteristics
1. Using imported Teflon or stainless steel mesh belt, ball conveyor and other options, the conveying speed is stable and adjustable
2. Multiple UV lamps can be installed according to the number of lamps to be turned on
3. Instant drying, high hardness, friction resistance, good shading, no leakage, no damage
4. Equipped with a powerful down-induced air system with a large air intake channel

Application: 

Widely used for the field of drying UV ink, UV coating for UV spray finishing, processing after paper's UV printing, UV glue, UV tests. 

Function and feature:

1, Well-designed cooling system reduces the heat generated by the light source, so as to avoid high temperature leaving some products (such as paper, PVC film) affected and deformed.

2, Electronic variable speed, speed is stable, sensitivity is adjustable.

3, High quality light source, long operating life, it can start instantly and access to normal brightness quickly.

4, Good stability and good environmental adaptability. During the use, energy output evenly, and after the prolonged uses, there is no significant change in the spectral distribution.

5, Strong exhaust pump makes the article adsorbed on the conveyor belt, and difficult to drift and fall.

Advantages:
1. Hot heat room with shelter door which can be adjust open/closed to save energy.
2. Infrared lamps quantity can be adjust by your needs
3. Conveyor by electric motor control, high speed can be adjust according to 
production speed needs
4.There install hot air recycle system on top of machine.
5. Max temperature 0-200degrees can be adjust by your production needs
6. Machine Inlet/outlet can be adjust height up/down according different products 
height. 
7. Every accessories distance/size can be adjust separate by panel bottom

Processing:
1.Enter →wrinkles on the uv surface→thorough light curing→thermal leveling to eliminate air bubbles→Drying→Air cooling→Output
After sales service:
1.Welcome customer come to our factory to learn how to operate.
2.If customers have special requirement, we also can send engineers come to their
factory to solution.
3. We can make CD to customers and teach them how to operate by step to step

Additional Info. 

Price Terms      --                EXW   
Payment Terms---               T/T or LC   
Packing ----                         Plywood   
Lead Time ----                     35 days after confirm Payment   
SKU ----                              0 SETS   need OEM&ODM
Standards Certificate ---       CE   

hot tags: uv ink curing equipment