Product Details

High Alumina Aggregate Refractory

High Alumina Raw Materials (also called bauxite or flint clay) are used to improve the performance of refractories by imparting properties such as strength, protection from chemical and physical attack, and slag resistance. Refractory products can be broadly divided into basic, neutral and acidic groups, which relate to the type of refractory environment the product has been designed for (e.g., basic oxygen steelmaking) and hence the minerals used in its manufacture.

Minerals commonly used for refractories include (but are not limited to) alumina, bauxite, graphite, kaolin, magnesia and zirconium. These minerals are produced globally but, in some cases, not always of grades suitable for refractory applications (e.g., magnesite and bauxite).

One of the most robust refractories is alumina, which consists of aluminum oxide and traces of other materials. Alumina is highly stable chemically and has superior hardness, strength and spalling resistance. Refractory suppliers manufacture alumina that is suitable for lining furnaces operating at temperatures up to 1843 centigrade degree.

The raw ores of alumina are mainly bauxite or flint clay, or the mixed homogeneous materials.

Our calcined bauxite products have high alumina and low iron content, making them ideal refractory materials. We use our crushing and sizing technology to supply customers with the highest quality sized calcined bauxite and brown fused alumina. Quality is of the utmost importance and we are constantly aware that any deviation from our high standards could have major implications for refractory lining stability.

Features

High alumina bauxite, iron bauxite, industrial alumina and clay as raw materials, which are made into mullite refractory bricks or High Alumina Bricks. The bauxite raw materials should be pre-fired to remove the structural water to avoid popping and splashing when the electric arc is concentrated and decomposed in the electric arc furnace.

Chemical & Physical Index

Physical Parameters

Color	White, gray, sometimes stained yellow, orange, red, pink, or brown by iron or included iron minerals
Streak	Usually white, but iron stain can discolor
Luster	Dull, earthy
Diaphaneity	Opaque
Cleavage	None
Mohs Hardness	1 to 3
Specific Gravity	2 to 2.5
Diagnostic Properties	Soft, low specific gravity, color. Often exhibits pisolitic habit.
Chemical Composition	Variable but always rich in aluminum oxides and aluminum hydroxides
Crystal System	n/a
Uses	The primary ore of aluminum. Synthetic bauxite is used as an abrasive and as a fracking proppant.

Chemical Parameters

Grades	Al₂O₃（%）	Fe₂O₃(%)	Ti₂O（%）	CaO+MgO（%）	K₂O+Na₂O（%）	Bulk Density (g/cm³)	Water Absorption (%）	Refractoriness (℃)
90	≥90	≤1.4	≤2.5	≤0.2	≤0.2	≥3.4	≤3	1910
87	≥87	≤1.8	≤3.1	≤0.2	≤0.2	≥3.2	≤3	1850
85	≥85	≤1.9	≤3.2	≤0.2	≤0.2	≥3.1	≤4	1800
80	≥80	≤2.0	≤3.5	≤0.3	≤0.3	≥2.9	≤5	1750
70	70-80	≤2.0	≤3.8	≤0.6	≤0.6	≥2.75	≤5	1710
60	65-70	≤2.0	-	≤0.6	≤0.6	≥2.45	≤6	1650
50	55-65	≤2.2	-	≤0.6	≤0.6	≥2.45	≤6	1610
45	45-55	≤2.5	-	≤0.6	≤0.6	≥2.40	≤7	1550