Color coated aluminum coil (embossed color coated aluminum coil) : (polyester color coated aluminum coil, fluorocarbon color coated aluminum coil)

Thickness 0.024-1.2(mm) Width 800-1220(mm) Material 1100 1060 3003 5052

It depends on the materials.

Color coated aluminum plate used for aluminum profile, thickness, strength and oxide film, should conform to the relevant national standards, wall thickness should be more than 1.2 mm, tensile strength to reach 157 Newton per square meter of millimeter, yield strength to reach 108 Newton per square millimeter, oxide film thickness should reach 10 microns. If not up to the above standards, is inferior aluminum alloy doors and Windows, can not be used.

Two, look at the processing.

Color coated aluminum plate, fine processing, exquisite installation, good sealing performance, switch freely. Poor aluminum alloy doors and Windows, blind selection of aluminum series and specifications, processing shoddy, to saw cutting instead of milling processing, do not install according to the requirements, poor sealing performance, switch is not free, not only air leakage and rain and glass cracking phenomenon, but also encounter strong winds and external forces, easy to push and pull part or glass scraping or crashing down, damage damage

Aluminum coil (cold rolled aluminum coil)

Materials 1060, 1145, 1050, 1100, 8011, 3003, 3004, 5052, 5083, 6061

Thickness 0.10mm----10mm

Width 800mm----1900mm

1. Special roll for anticorrosion and insulation (insulation aluminum skin) : Material 1060 3003

Thickness 0.3-3.0(mm) Width 1000-1900(mm)

Aluminum plate (cold rolled aluminum plate) (perforated aluminum plate)

Material 1060, 1100, 1050, 1145, 8011, 3003, 3004, 5052, 5754, 5083, 6061,

Thickness 0.1mm-- 680mm

Width 800mm----1900mm

Aluminum strip (cold rolled aluminum strip) material: 1060 1100 8011 3003

1 transformer special aluminum strip material 1060 0 state thickness 0.3-3.0(mm),

2. Aluminum strip material of aluminum plastic composite pipe 8011 O state thickness 0.16-0.3(mm)

Aluminum tile for anti-corrosion and insulation (corrugated aluminum plate) : Material 1060 3003, thickness 0.3 -- 1.5(mm), aluminum tile type YX35-125-750,YX23-210-840,YX12-100-880,YX14-65-850,YX25-205-820,YX15-225-900

Decorative aluminum plate: Material 1060 1100 3003 5052

1. Orange peel pattern aluminum plate: thickness 0.01-3.0(mm) width 800-1220(mm)

2. Semi-spherical pattern aluminum plate: thickness 0.1-1.0(mm) width 800-1220(mm)

3. Size argyle pattern aluminum plate: thickness 0.1-2.0(mm) width 800-1220(mm)

4. Five rib pattern aluminum plate: thickness 0.9-8.0(mm) width 800-1220(mm0. Compass pattern aluminum plate, hot rolled aluminum strip. Hot rolled aluminum coil: hot rolled aluminum sheet: aluminum sheet. Coated aluminium sheet. Aluminium coil. Alloy aluminium rolls. Anti-corrosion and insulation aluminium rolls. Embossed aluminium sheet rolls. Corrugated aluminium sheet.