DS211 is an update style of DSO201, a pocket size digital storage oscilloscope fulfills basic electronic engineering requirements. It is equipped with 320*240 color display, Weighs only 65g! Portable Digital Oscilloscope DIY Kit provides waveform viewing.

Product Specification : 

• MCU: STM32F103VC

• ADC: MCU internal ADC

• Number of channels: 1 Analog channel + 1 internal channel

• Analog bandwidth: 200KHz

• The maximum sampling rate: 1MSa/s

• Maximum storage depth: 8K

• Horizontal scanning speed: 1uS / Div ~ 2S / Div (1-2-5 step)

• Vertical Sensitivity: 20mv / Div ~ 10V / Div (1-2-5 step)

• Input impedance: 1MΩ

• Coupling: DC / AC

• Trigger mode: Rising / falling edge trigger

• Auto adjustment mode: AUTO_FIT

• Operation waveform: -A, RecA, A + RecA

• Signal output: Square wave, sine wave, triangular wave, sawtooth wave

• Trigger mode: Auto, Normal, Single, None, Scan

• Measured values: Signal frequency / period / duty cycle, Voltage peak-to-peak value / effective value / maximum value / minimum value / average value

• Storage: 8MB built-in USB flash disk

• Can be installed 1 PC APP

• Operation: Press the key

• USB interface: Micro USB

• Battery: 550mAh

• Screen size: about 2.8 inches

• Screen resolution: 320*240

• Size: about 106.5*55.7*11.5 mm/ 41.93*21.93*4.53 in

• Weight (with battery): about 65g

• Open source: application layer open source

• Certification: CE / FCC

Usage : 

1. Based on STM32 do open source products. Oscilloscope and a multimeter.

2. The good helper in measurement and maintenance work.

3. Can be used as a good tool for STM32 series MCU programming.

Packing List : 

• 1 * DS211 host

• 1 * DS211 dedicated MCX probe

• 1 * 800mah built-in lithium battery

• 1 * Mini USB cable

• 1 * Manual

• 1 * Cloth velvet protective bag