DC current/voltage/power/energy meter, buy Acrel 8 digit LCD display Max 1000V power types of 75mV dc energy meter watt voltage reading in kwh on China Suppliers Mobile

Product Details

DJSF1352-RN DC Dual-circuits Monitoring DIN Rail Energy Meter

Products Description

● Measurement: kWh, kVarh, Power, Current, Voltage and etc
● Current Rating: -/75mV (with Shunt); -/4~20mA (with Hall Sensor)
● Voltage Rating: 0~1000V DC
● Application: DC Battery; Charging Pile; Solar PV and etc
● Communication: RS485 (MODBUS-RTU)
● Extra Function: Dual DC Circuits Monitoring; Secondary RS485 (MODBUS-RTU); Built-in Bipolar Power Source (for Hall Sensors);
DO/DI Function
● Display: LCD Display
● Dimension: 72*71*87.8mm (L*W*H)
● Installation: 35mm DIN Rail
● Power Supply: 85~265V AC/DC; 24V(±10%) DC; 48V(±10%) DC
● Standard&Certificate: CE

DJSF1352-RN rail-mounted DC power meter with double DC input channels, designed for telecommunications base stations, DC charging piles, solar photovoltaic and other applications, this series of meters can measure the voltage, current, power and forward and reverse energy and so on in the DC system.The actual use of the site, you can measure the total power, but also measure the energy within a specified period of time. The test results can be used for local display, but also with industrial control equipment, computers to form a measurement and control system. The meter can have infrared communication interface and RS-485 communication interface, and supports Modbus-RTU protocol and DLT645-97 (07) protocol at the same time. The meter can have relay alarm output and digital input function;You can set the ratio, alarm, and communication through the meter panel keys according to different requirements.The meter can have event recording of switch (Modbus protocol), programming and event setting records (645 protocol), instantaneous and timing freeze function of data (645 protocol), maximum and minimum value recording function of voltage and current power.

Dual Independent DC Circuits Monitoring
● For Twin EV Charger&Battery
● Voltage Input:DC 0~1000V
● Current Input (by Shunt): 0~75mV
● Current Input (by Hall Sensor): 0~5V, 0~10V, 0~20mA, 4~20mA

Built-in Bipolar Power Source
● Power Supply for Hall Effect CT
● Range: DC -12V ~ DC +12V

Optional Dual RS485 Communication
● Protocol: MODBUS-RTU
● 1 RS485 (standard)

DO/DI Function
● 2 DO (2A/30V DC; 2A/250V AC)
● 2 DI (dry contact)

LCD Display
● Parameter Display
● Programming Interface

Keypads HMI for Programming
● Parameter Display Setting
● Communication

Technical Parameter

Technical parameters			Index
Input	Nominal value	Voltage input range	Current input
				DC0-1000V	Shunt:0-75mV Hall sensor:0-20mA,4-20mA,0- 5V,0-10V and so on.
		Overload	1.2 times rated(continuous);2 times rated/1 second;
		Power consumption	Voltage:≤0.2VA, Current:≤0.1VA
Accuracy class			class 1
Function	Display	8-bit segment LCD screen (LCD)
		Communication Interface	RS485, infrared
		Communication protocol	Modbus-RTU，DL/T 645-2007
		Switch	Switch output	2 Relay outputs, 2A/30VDC or 2A/250VAC
				Switch input	2 dry contact inputs
		Pulse output	A second pulse output, a energy pulse output
				See the SYS->PLUS display in the meter menu settings. For example: The meter displays 100, which is 100imp/kWH
Power Supply	Voltage range	AC/DC 85-265V or DC24V(±10%) or DC48V(±10%)
		Power consumption	≤ 3W
Power frequency withstand voltage			Power supply // Voltage input // Current input // Relay output and switch input // Communication interface / / Pulse output 3kV/1min Power supply // Relay output // Voltage input // Current input 3kV/1min Pulse output // Communication interface // Switch input 2kV/1min
Insulation resistance			≥ 40M Ω
Average barrier-free working hours			≥50000h
Environment	Temperature	Normal operating temperature: -25 °C ~ +55 °C; Limit working temperature: -40 °C ~ +70 °C; Storage temperature: -40℃～+70℃
		Humidity	≤93%RH, no condensation, no corrosive gas
		Altitude	≤2500m