AC power/energy meter, buy ACR10R-D24TE Single phase PV energy meter solar power inverter energy meter with split core CT on China Suppliers Mobile

Product Details

Single Phase Energy Meter for Solar Inverters

Products Description

Grid: Single-phase

Accuracy :
Voltage: 0.2 Current, Power, Active energy: 0.5 Frequency: 0.01Hz Reactive energy: 1

Communication: RS485 Modbus-RTU

Dimension(L*W*H) : 85*74*54mm

Installation : DIN 35 mm

Power supply : AC85～265V or DC100～350V

Power consumption : ≤10VA

Input consumption : Less than 0.2VA

Characteristic

Single phase LCD din rail energy meter with 16mm split CT enabled cable 200A input. It suitable for power monitoring of grid-connected PV power station,power management and so on. It is easy to install without removing primary bus bar and cost-effective. It can measure current,voltage, active power,reactive power,frequency,power factor and so on. It supports multi-tariff energy metering,4 quadrant energy metering,harmonic analyse and so on.

Used for distributed Solar PV
●Reflux Monitoring
● Harmonic Monitoring

Bidirectional Metering
● Active Energy Metering
● Reactive Energy Metering

RS485 Communication
● MODBUS-RTU Protocol
● Communicate with Inverter to realize anti-reflux Function

Single-phase Two-Wire Connection
● Paired with external split core CT
● Rated Voltage: AC 100V, 400V

LCD Display
● Parameter Display
● Programming Interface

Keypads HMI for Programming
● Parameter Display Setting
● Communication(address, baud rate and etc.)

Technical Parameter

Technical parameters			Indicators
Input	Grid	Single-phase
		Frequency	45～65Hz
		Voltage	Rated voltage: AC 100V, 400V
				Overload: 1.2 times the rated voltage(continuous); 2 times the rated voltage lasting for 1 second
				Power consumption: less then 0.2VA
		Current	Rated current: 10A，20A，40A，80A，120A，200A etc. (for details see product specifications)
				Overload: 1.2 times the rated current(continuous);10 times the rated current lasting for 1 second
				Power consumption: less then 0.2VA
Output	Communication	RS485 interface, Modbus-RTU
		Display	LCD
Measurement precision			Voltage: 0.2 level, current, power Active energy: 0.5 level,0.01Hz frequency, Reactive energy: 1 level
Power supply			AC85～265V or DC100～350V; power consumption ≤10VA
Safety	Power frequency withstand voltage	AC2kV 1 min between power supply // current input//voltage input and communication AC2kV 1 min between each pair of combinations among power supply, urrent input and voltage input.
		Insulating resistor	Input,output terminal to housing >100MΩ
Environment			Working temperature: -10℃～+55℃;storage temperature: -20℃～+70℃ Relative humidity:5%～95%，non-condensing; altitude:≤2500m