ADL200 Single Phase Energy Meter
Products Description
ADL200 single-phase electronic watt-hour meter is mainly used to measure single-phase active energy in low-voltage networks. It can also measure voltage, current, power and other electricity. It can also be equipped with RS485 communication function to facilitate users to monitor, collect and manage electricity consumption. It can be flexibly installed in the distribution box to realize the sub-item electric energy measurement, statistics and analysis of different areas and different loads. The product meets the requirements of the national standard GB/T17215.321-2008 and the enterprise standard Q31/0114000129C035-2017 "Enterprise Standard for Rail Mounted Electric Energy Meters".
● Measurement: 1-phase AC kWh, Active Power, Current, Voltage and etc
● Accuracy: 1.0% (kWh)● Frequency: 45~65Hz
● Rated Voltage: 220~264Vac (direct connect)
● Rated Current: 10(80)A AC (direct connect)
● Communication: RS485 (MODBUS-RTU)
● Multi-rate/tariff: 4 Tariff Rates and etc
● Dimension: 90*36*65mm (L*W*H)
● Installation: 35mm DIN Rail
● Standard&Certificate: IEC; CE;CE-MID;EAC
Diverse Electricity Parameters Measurement
● U (Voltage)
● I (Current)
● P (Power)
● Q (Reactive power)
● S (Apparent power)
● PF (Power factor)
● kWh (Kilowatt-hours)
● kVarh (Kilovar-hours)
● U (Voltage)
● I (Current)
● P (Power)
● Q (Reactive power)
● S (Apparent power)
● PF (Power factor)
● kWh (Kilowatt-hours)
● kVarh (Kilovar-hours)
Multi-rate/Flexible Tariff
● 4 Time zone
● 4 Tariff rate (Spike, Peak, Flat, Valley)
● 2 Time period list
● 14 Time period by day
● 4 Time zone
● 4 Tariff rate (Spike, Peak, Flat, Valley)
● 2 Time period list
● 14 Time period by day
HMI for Parameters Setting
● Code
● Protocol
● Address
● Baud rate
● Parity
● All Display
● Code
● Protocol
● Address
● Baud rate
● Parity
● All Display
Technical Parameter
1.Function
Function | Function description | Function provide |
Measurement of kWh | Single-phase active kWh (positive and negative),3 months historical energy data frozen storage | ■ |
Measurement of electrical parameters | Voltage, Current, Active power, Reactive power, Apparent power, Power factor and Frequency | ■ |
LCD Display | 8 bits section LCD display | ■ |
Key programming | 3 keys to set parameters like code, address, baud rate, multi-tariff and communication protocol | ■ |
Pulse output | Active energy pulse output | ■ |
Multi-tariff | Adapt 4 time zones, 2 time interval lists, 14 time interval by day and 4 tariff rates | □F |
Communication | Communication interface: RS485, Communication protocol: MODBUS-RTU | ■ |
(■:Standard;□:Optional)
2.Technical parameter
2.Technical parameter
Input voltage | Reference voltage | AC 220V | |
Reference frequency | 50Hz | ||
Power consumption | <10VA | ||
Input current | Basic current | 10A | |
Maximum current | 80A | ||
Starting current | 4‰Ib | ||
Consumption | <4VA | ||
Measurement performance | Accuracy of measuring | 1 class | |
Range of measuring | 000000.00~99999999kWh | ||
Clock accuracy | Error≤0.5s/d | ||
Active pulse | Pulse width | 80±20ms | |
Pulse constant | 1000imp/kWh | ||
Communicati on | Interface | RS485(A+、B-) | |
Connection mode | Shielded twisted pair conductors | ||
Protocol | MODBUS-RTU |
Temperature range | Work temperature | -25℃~55℃ | |
Storage Temperature | -40℃~70℃ | ||
Relative humidity | ≤95%(No condensation) | ||
Altitude | <2000m |
Wiring Illustration
PIN/Terminal Overview of ADL200
Power Wiring: 1-phase 2-wire via direct connect
Communication Wiring: RS485 wired Communication with IoT Gateway
Dimension & Installation
Solution Structure
Certification
Company Profile
FAQ