ADL100-ET Single-phase DIN Rail Energy Meter
ADL100-ET single phase electric meter is designed for single phase active energy measurement on low voltage system, in the same time it can measure the electrical parameters like voltage, current, power and so on. There is also RS485 can be chosen. This power meter has advantages of smaller volume, high precision, good EMC, easily installing etc, All meters meet the related technical requirements of electronic power meter in the IEC62053-21、IEC62053-22 standards.
Products Description
● Reference Voltage: AC 220V
● Input Current: 10(60)A
● Small Compact Size
● Diverse Electricity Parameters Measurement
● Multi-rate/Flexible Tariff (Optional)
● HMI for Parameters Setting
● DIN Rail Installation
● IEC62053-21:2003; IEC62053-22:2003; CE; EAC● RS485 (MODBUS-RTU) (Optional)
Small Compact Size
● Dimension (L*W*H): 36mm*88mm*70mm
● Dimension (L*W*H): 36mm*88mm*70mm
Diverse Electricity Parameters Measurement
● U (Voltage)
● I (Current)
● P (Power)
● Q (Reactive power)
● S (Apparent power)
● PF (Power factor)
● kWh (Kilowatt-hours)
● kVarh (Kilovar-hours)
● U (Voltage)
● I (Current)
● P (Power)
● Q (Reactive power)
● S (Apparent power)
● PF (Power factor)
● kWh (Kilowatt-hours)
● kVarh (Kilovar-hours)
Multi-rate/Flexible Tariff
● 4 Time zone
● 4 Tariff rate (Spike, Peak, Flat, Valley)
● 2 Time period list
● 14 Time period by day
● 4 Time zone
● 4 Tariff rate (Spike, Peak, Flat, Valley)
● 2 Time period list
● 14 Time period by day
HMI for Parameters Setting
● Code
● Protocol
● Address
● Baud rate
● Parity
● All Display
● Code
● Protocol
● Address
● Baud rate
● Parity
● All Display
DIN Rail Installation
● 35mm standard DIN rail
● 35mm standard DIN rail
LCD Display
● 8 digits
● 8 digits
Technical Parameter
Function
Function | Function description | Function provide |
Measurement of kWh | Single-phase active kWh (positive and negative) | ■ |
Measurement of electrical parameters | Voltage, Current, Active power, Reactive power, Apparent power, Power factor and Frequency | ■ |
LCD Display | 8 bits section LCD display | ■ |
Key programming | 3 keys to set parameters like code, address, baud rate, multi-tariff and communication protocol | ■ |
Pulse output | Active energy pulse output | ■ |
Multi-tariff | Adapt 4 time zones, 2 time interval lists, 14 time interval by day and 4 tariff rates | □F |
Communication | Communication interface: RS485, Communication protocol: MODBUS-RTU | □C |
Infrared communication | ■ |
Technical parameter
Input voltage | Reference voltage | AC 220V | |
Reference frequency | 50Hz | ||
Power consumption | <10VA | ||
Input current | Basic current | 10A / 20A | |
Maximum current | 60A / 100A | ||
Starting current | 4‰Ib | ||
Consumption | <4VA (Maximum current) | ||
Measurement performance | Accuracy of measuring | 1class | |
Range of measuring | 000000.00~99999999kWh | ||
Clock accuracy | Error≤0.5s/d | ||
Active pulse | Pulse width | 80±20ms | |
Pulse constant | 1600imp/kWh,LED | ||
Communication | Interface | RS485(A+、B-) | |
Connection mode | Shielded twisted pair conductors | ||
Protocol | MODBUS-RTU |
Wiring Illustration
Dimension & Installation
Solution Structure
Certification
Company Profile
FAQ