Mitsubishi iQ-R series 64-axis SSCNET III/H connected sports CPU module, R64MTCPU price, R64MTCPU parameter, R64MTCPU specification, R64MTCPU external connection.

MELSEC-Q sports CPU models include R16MTCPU, R32MTCPU and R64MTCPU.

R64MTCPU parameter description: 64 axes (1 system 16 axes * 2); SSCNET III/H (2 systems); Linear interpolation, circular interpolation and spiral interpolation; Positioning data 6400 data/axis.

Detailed description of product specification parameters

1. Control specification

[Number of control axes] 32 axes (1 system 32 axes * 2)

[Operation period] 0.222ms, 0.444ms, 0.888ms, 1.777ms, 3.555ms, 7.111ms

[Interpolation function] 4-axis linear interpolation, 2-axis circular interpolation, 3-axis spiral interpolation

[Control mode] PTP (Point To Point) control, speed control, speed and position switching control, fixed-size delivery, connection track control, position tracking control, positioning position stop control, high-speed oscillation control, advanced synchronization control, cam control, speed and torque control

[Acceleration and deceleration treatment] trapezoidal, S-shaped, advanced S-shaped acceleration and deceleration

[Compensation function] Clearance compensation, electronic gear, phase correction

[Programming language] Motion SFC, special instructions

[Servo program capacity] 32K steps

[Positioning data] 6400 data axis

[Peripheral device interface]

Sports CPU: PERIPHERAL I/F

PLC CPU：USB，Ethernet

[Origin reset function] Proximity dog type (2 types), count type (3 types), data setting type (2 types), dog cradle type, stop stop stop type (2 types), limit switch combination type, scale origin signal detection type, scale origin signal detection type (origin reset retry, origin transfer)

[JOG operation function] Yes

[Manual pulse generator operation function] 3 sets can be connected (when high-speed counter is used)

[Speed and torque control] Speed control, torque control and pawn control not included in position circuit

[Synchronous encoder operation function] Up to 12 sets can be connected

[M code function] M code output, completion function, etc

[Limit switch output function]

Output points: 64 points * 2 intervals

Focus data: motion control data, word device

[ROM operation function] Standard function (no battery operation)

[External input signal setting function] External input signal (FLS, RLS, DOG) of servo amplifier, bit device

[Torque limit value change function] Positive direction torque limit value, negative direction torque limit value

[Target location change function] Yes

[Servo parameter change function] Yes

[Servo amplifier control mode switching function] Gain switching function, control mode switching of PI-PID control, control loop (fully closed/semi-closed)

[Any data monitoring function (SSCNET III/H)] Communication data 6 points/1 axis

[Emergency stop] Emergency stop of motion controller, servo amplifier forced stop terminal

[Input and output points] 4096 points in total

[Timing setting] Yes

[Security feature] File password, password in the SFC program unit of the movement, security key function

[Clear all function] Clear all user data in motion CPU

[Remote operation] Remote run/stop, remote latch clear

[Digital oscilloscope function] Motion buffer scheme (real-time waveform display available) Sampling: word 16CH, 16CH bit sampling offline message

[Position system] corresponds to the battery connected to the servo amplifier)

[Number of SSCNET III/H systems] 2

2. R16MTCPU unit specification

[Number of control axes] 64 axes

[Servo amplifier connection mode] SSCNET III/H (2 systems)

[Extension line distance] SSCNET III/H: 3200m

[Inter office distance] SSCNET III/H: 100m

[Number of SSCNET III/H unit connected offices] 8 offices (1 system 4 offices)

[PERIPHERAL I/F(Ethernet)]

Data transmission speed: 100Mbps/10Mbps

Transmission mode: baseband

Cable length: 30m

[Memory card slot] SD/SDHC memory card

[Memory capacity] Standard ROM 12Mb, SD memory card capacity (32Gb)

[Number of extended cascade segments] 7 segments

[DC5V internal consumption current] 1.2A

[Boundary dimension H * W * D] 106 * 27.8 * 110mm

1. Mitsubishi full series PLC, frequency converter, human-machine interface, servo system.

2. Xinjie PLC, frequency converter, human-machine interface and servo system.

3. Delta PLC, frequency converter, human-machine interface and servo system.

4. Wellington human-machine interface and Hytec human-machine interface.

Mitsubishi servo motor HG-JR15K1MB;

Mitsubishi servo motor HG-JR11K1MB;

Mitsubishi servo drive MR-J4-11KA

Mitsubishi servo drive MR-J4-11KB

Mitsubishi servo drive HG-KR-23J with oil seal

Mitsubishi servo store HG-KR053

Mitsubishi servo motor HG-KR73BJ with oil seal

Mitsubishi servo motor HG-SR102BJ with oil seal

Mitsubishi MR-J4-15KB servo driver

Mitsubishi PLC (programmable controller) A, R, Q, L, CC-LNK, FX3SA, FX3G, FX3G, FX3U, FX5U and other series;

Mitsubishi frequency converter A840, E840, F840, E740, D740, D720 series; Mitsubishi touch screen GT2000 series; Mitsubishi servo motor JE, J4 series.

Mitsubishi programmable controller: FX3GA, FX3GE, FX3G, FX3U, FX3UC, FX2NC, A, Q, CC-LINK remote module and other series

Mitsubishi variable frequency governor: FR-L700, FR-A700/500, F700/500, E700/500, D700/500, S500 and other series;

Man-machine interface: GOT2000, GOT16, GOT15, GOT12, GOT11, GOT10, A900GOT, F900GOT and other series;

AC servo system: MR-J4, MR-JE, MR-J3, MR-J2S, MR-E, MR-ES and other series;

Tension control system: LE-40MTA (B), LD-FX, LD-50PAU and other series:

Low-voltage electrical appliances: S-N, TH-N, etc.