YXB65-254-762 is a closed floor bearing plate, which evolved on the basis of other plate types. Its rib height is 65mm, composed of 3 waves, each with a wave pitch of 254mm, a whole plate width of 762mm, a feeding width of 1250mm, and a utilization rate of 60%.

Profiled steel plate because the original plate is very thin, the quality of anti-corrosion coating directly affects the service life, in order to adapt to the processing and anti-rust requirements, the coated steel plate needs to be inspected according to the relevant regulations. Under normal circumstances, the thin steel plate can also be applied with anti-rust paint after pressing according to the requirements of use, or the original stainless steel plate is used.

When the profiled steel plate is used as the roof panel and wall panel of the industrial plant, the amount of steel used per square meter is about 5~11 kg in the case of general no thermal insulation requirements. When there are thermal insulation requirements, mineral wool board, glass wool, foam plastic, etc. can be used as heating materials. Profiled steel plates are combined with concrete to form composite floor slabs, which can eliminate wooden formwork and can be used as a load-bearing structure. At the same time, in order to strengthen the adhesion between the profiled steel plate and the concrete, it is advisable to pre-weld the bolt or press the two-way stiffener on the steel plate.