Vertical machine center, buy M8 CNC Machine Centre on China Suppliers Mobile

Product Details

General Information

M Series vertical type machining center is known by their superior cost performance, it is a new generation CNC machine tools. FANUC control is stander configuration for this serious machine. M series machine can used to drilling, reaming, spot facing, tapping, milling, boring and other machinery processing. This type machine have very wild application from automobile, motorcycle to aerospace and military industry.

M8 equipped with full protection, which can effectively prevent coolant and chips from cutting. Splashing guarding is beautiful and generous. The spindle is from Taiwan, with good performance and very long life-span. Machine can equip 4^th axis rotary table and chiller unit for spindle. The automatic chip conveyer can ensure cleanliness for internal of machine center.

Data sheets for M8

NO.	Project	unit	data
1	Table dimensions(L*W)	mm	1000*550
2	T - Slots	mm	18-5
3	T - Slots dimensions	mm	18590
4	Max. weight permitted on the table	kg	500
stroke
5	X-axis stroke	mm	800
6	Y-axis stroke	mm	550
7	Z-axis stroke	mm	550
8	Distance of Spindle center to column railway surface	mm	595
9	Distance spindle nose to table with head in vertical position	mm	150-700
Spindle
10	Spindle taper	BT40/Φ150
11	Spindle speed	r/min	0-10000
12	Rated power of servo spindle motor	kw	7.5
13	30 min max. power of servo spindle motor	kw	11
14	Max. torque of servo spindle motor	Nm	70
15	Drive type of spindle	belt type
16	Spindle accuracy	Spindle end face runout: 0.003mm
16	Spindle accuracy	Radial runout of Spindle: near end 0.003mm
Tool holder specification
17	Tool holder standard	MAS403 BT40
18	Taper standard	MAS403 P40T-1（45º）
Feed
39	Max. speed of feed motor on x/y axis	r/min	3000
40	Rated power of feed motor on x/y axis	kw	3
41	Max. torque of feed motor on x/y axis	Nm	64
42	Max. speed of feed motor on z axis	r/min	3000
43	Rated power of feed motor on Z axis	kw	3
44	Max. torque of feed motor on z axis	Nm	64
45	X/Y axis rapid speed	m/min	48
46	Z axis rapid speed	m/min	48
47	working feed rate	mm/min	1-10000
Tool magazine
48	Magazine type	Round type with arm
49	Tool magazine capacity		24
50	Maximum tool size (full)	mm	Ф80
51	Maximum tool size (empty)	mm	Ф150
52	Maximum tool weight	kg	8
53	Maximum tool length	mm	300
54	Tool to tool exchange time	s	1.9
55	Tool selection mode	Forward and reverse direction to select the nearest tool
Power source
56	Total electrical capacity of machine tool	KVA	25
57	Cooling pump flow	L/min	40
58	Compressed air for machine tool	Kgf/cm2	6～8
59	Power requirements	380VMC±10% 50Hz
Environmental requirements
60	Temperature requirements	0℃～40℃
61	relative humidity	20%～80%
Machine tool dimensions
62	Machine tool size	mm	270024002500
63	Machine weigh	kg	5000
64	Guarding		enclosed
Accuracy
65	X/Y/Z Positioning accuracy	mm	±0.005/300
66	X/Y/Z Repeat positioning accuracy	mm	±0.003/300
other
67	X/Y/Z Rail way on X/Y/Z	Bar type liner way on 3 axis
68	Number of Z-axis blocks	6 blocks
69	Chip Conveyer	Flush basement /Chain type chip conveyor
70	Cleaning	Air gun
71	Spindle protection / cooling mode	Air protection
72	Coolant though spindle	Coolant though spindle to chill the tool

Main part list

No.	Parts	Original	Manufacturer	Mod.
1	CNC	JAPAN	FANUC	FANUC MF PLUS(5)
2	Feed axis motors	JAPAN	FANUC
3	Spindle Motor	JAPAN	FANUC
4	Drives	JAPAN	FANUC
5	Spindle	Taiwan	ROYAL	BT40/φ150
6	Ball screw	Taiwan	HIWIN/PMI	4016
7	Liner way	Taiwan	HIWIN/PMI	45#
8	ATC	Taiwan	OKADA	BT40-24T
9	Heat exchanger	China	CG	EA-02W/220VMC
10	Bearings	Germany	FAG	30TAB062
11	Lubrication	China	YuXiang
12	Electrical parts	France	schneider
13	Pneumatic	Taiwan	AirTAC
14	CTS	Taiwan		30bar