Main Products: welding electrodes ,mig wires ,flux cored wires
TecMig Submerged arc SAW Welding Wires EL8
USD $0.8 - $1.1 /Kilogram
Min.Order:1000 Kilograms
Quick Details View All >
Business license
Business Type: Manufacturer
Wuhan Hubei ChinaMain Products: welding electrodes ,mig wires ,flux cored wiresProduct Details
EL8
AWS A5.17 EL8
Description：
EL8 is a copper coated mild steel wire for Submerged Arc Welding (SAW) of mild and medium carbon structural steels. Combined with flux HJ430 and HJ431, EL12 is used to weld low carbon steel and some low alloy steel(like 16Mn、Q235) structures.
Diameters:
2.0mm, 2.5mm, 3.2mm, 4.0mm, 5.0mm.
Typical Mechanical Properties:
Tensile strength(MPa): | 462 |
Yield strength(MPa): | 370 |
Elongation(%): | 32 |
Impact values(≥47J/-20℃): | 80 |
Typical Chemical Compositon:
C | Mn | P | S | Si | Ni | Cr | Mo | Cu |
0.054 | 0.42 | 0.012 | 0.010 | 0.12 | 0.01 | 0.014 | -- | 0.07 |
Welding Current:
Dia:(mm) | 2.0 | 2.5 | 3.2 | 4.0 | 5.0 |
Current/A | 380-420 | 430-470 | 480-520 | 530-570 | 580-620 |
Voltage/V | 28-32 | 28-32 | 28-32 | 28-32 | 28-32 |
Note:
1. Rusty, water, oil and other impurity should be cleaned before welding.
Flux should be bake 1-2 hours in 200-250℃ before using.
According to the requirements to choose right welding parameter.
Contact Supplier
You May Like
New Products
Popular Searches
Recommended Products
Find Similar Products By Category
Facebook
X
Pinterest
Linkedln