German technical background VOK ®- Disper W985 Wetting Dispersant

VOK ®- Disper W985 is a wetting and dispersing agent used to cure resin systems and adhesives at room temperature to reduce the viscosity of inorganic filling systems.

Product Information

Chemical composition

Acid polyester solution.

Typical Physicochemical Data

The data given in this data page are only typical values, not technical indicators of the product.

Density (20 ° C): 0.94 g/ml

Refractive index (20 ° C): 1.455

Non volatile matter (10 minutes, 150 ° C): 10%

Flash point: 45 ° C

Application field

Room temperature curing resin system

Features and Benefits

VOK ®- Disper W985 can be used in unsaturated polyester resin, polyurethane and epoxy resin to speed up the wetting and dispersion of various commonly used fillers, such as calcium carbonate and aluminum hydroxide. It can greatly reduce viscosity and thus increase the filling amount. VOK ®- Disper W985 usually does not prevent the settlement of the filler. The gel time may be prolonged in cobalt promoted unsaturated polyester resin, which should be adjusted by increasing the amount of cobalt added.

Recommended dosage

0.5-1.5% dosage of additives (purchased form) is based on filler.

The above recommended dosage is for reference, and the appropriate dosage shall be determined through a series of tests.

Adding method and processing guidance

In order to obtain good results, the additive should be added before adding powder.

Adhesives and Sealants

Features and advantages VOK ®- Disper W985 is a mono functional, deflocculating wetting and dispersing agent, especially recommended for various filled epoxy systems. It can speed up the wetting and dispersion of various commonly used fillers, such as calcium carbonate and aluminum hydroxide. It can greatly reduce the viscosity, thus increasing the filling amount. VOK ®- Disper W985 usually does not prevent the settlement of the filler. The additive is also suitable for polyurethane system.

Recommended dosage

0.5-1% of auxiliary dosage (purchased form) is based on filler.

The above recommended dosage is for reference, and the appropriate dosage shall be determined through a series of tests.

Adding method and processing guidance

In order to obtain good results, the additive should be added before adding powder.