Product Details

3. What is the raw material of FIBC bags?The FIBC is made of 100% polypropylene. According to some extra requests, maybe there is an inner pe bag inside the jumbo bag.4. What is woven polypropylene made from? Non-woven and woven polypropylene is made from plastic resin. The resin will go through a complex process of chemical and physical treatment. And finally, it will be stretched into the shape of plastic film.5. Does the jumbo bag has the feature of being water-tight or waterproof?

The answer is No, because the jumbo bag is made from woven fabric, the bag does not have the feature of water resistance. Some customers may prefer a coating or lamination as a moisture barrier, but this barrier is limited to a certain amount of moisture. The transportation process still needs extra protection since it's not 100% moisture-proof. Most of the efforts were made to increase the carrying capacity.

According to the local climate and specific storage conditions, we can customize the lamination. Therefore, as we said earlier, jumbo bags are designed for carrying dry products instead of wet products. If you are looking for a solution, particularly for wet products, don't hesitate to contact us and send us inquiries.

Mr.Daniel

Mobile Phone:+86-13802155833

WeChat:+86-13802155833

WhatsApp:+86-13802155833

E-mail: tjwoking@163.com

6. What is the method to pick up jumbo bags?

There are two lifting belts laminated on both sides of the bag. In the process of transferring, it can be easily picked up by lifting machines through the belts. There are some guidelines as to how to safely lift the jumbo bag.First, you should ensure the bag itself is not damaged. The design of such a bag is to carry heavy dry products, so normally it can withstand day-to-day wear. But you still need to handle it with care.Secondly, make sure the maximum weight of the forklift is compatible with the weight of a full-load jumbo bag. if not, you are going to face the risk of unnecessary mechanical damage.

7. How can I empty an FIBC bag? Transportation is only a part of the whole system, in the final stage, we are facing problems of how the products in the jumbo bag can be discharged safely without wastage.The most traditional way of discharging a jumbo bag is through a discharge spout, which is added to the bottom of the bag. Usually, the discharge spout is tucked inside a closure on the bottom of the bag.The closure is sometimes called a petal closure, pajama closure, star, or x-cut closure. The closure is designed to protect the spout and to prevent the product from sifting out of the discharge before its intended discharge. Discharge spouts can be customized with specific sizes and closures.There are several ways as to methods of discharging bulk bags.The first and most common one is gravity. This is a fairly easy way to empty the bag because you just need to open the discharge spout and let the products flow to the intended unloading area. However, the flaw in this method is that you cannot control the amount of material to be released.Second, some jumbo bags don’t have a discharge spout therefore the discharging process requires manual work by using a C-shaped cutting on the bottom of the bag. The disadvantage is also obvious. Once the bag is cut open, it cannot be reused but discarded