German technical background VOK ®- Disper 194 Wetting Dispersant

VOK ®- Disper 194N is a wetting and dispersing agent for water-based systems and pigment concentrates, especially suitable for water-based two-component polyurethane and two-component epoxy systems

Product Information

Chemical composition

Modified carboxyl polyglycol copolymer solution

Typical Physicochemical Data

The data given in this data page are only typical values, not technical indicators of the product.

Acid value: 75 mg KOH/g

Density (20 ° C): 1.08 g/ml

Non volatile matter (10 minutes, 150 ° C): 57%

Solvent: water

Storage and transportation

Turbidity or stratification may occur when the temperature is lower than 10 ° C, heat to 20 ° C and mix thoroughly.

Application information

Coating industry

Features and Benefits

The additive can deflocculate the pigment through space steric hindrance. Because the pigment particles of the deflocculation are very small, high luster and color intensity can be obtained. In addition, it can increase the transparency and hiding power and reduce the viscosity, thus improving the leveling property and increasing the pigment content.

Recommended for

VOK ®- Disper 194 N is used for the production of resin containing or resin free pigment concentrates, as well as pigment grinding of water-based coatings. Especially recommended for water-based two-component polyurethane and two-component epoxy systems. Use VOK ®- Disper 194 N pigment concentrate can be added to either the amine component or the epoxy resin.

Industrial coatings

Wood and furniture coatings

Anticorrosive coating

Recommended dosage

Additive dosage (purchase form) is based on pigment:

Inorganic pigment: 15-35%

Titanium dioxide: 7-13%

Organic pigment: 30-90%

Carbon black: 100-150%

The above data are empirical dosage, and good dosage shall be determined through a series of tests.

Addition method and processing guidance

In order to obtain good performance in the resin containing system, the additive should be slowly added to the water-based resin under stirring conditions. When it is used for resin free pigment concentrate slurry, it is only necessary to mix the additive with water. Add pigment after the additives are mixed evenly.

Special attention

Use VOK ®- The pigment concentrate of Disper 194 N must be neutralized before being added to the paint mix