Factory 4G LTE Wireless Wifi Router  With Marvell 88MP1802 CPU 

Product PCBA Name TDD-LTE FDD-LTE TD-SCDMA UMTS EDGE/GPRS TDD-LTE CA FDD-LTE CA
M261 L26H 38/ 40/ 39/41n 1 /2/3 /5/7 /8 /12/20 / 1 /2 /5 /8 2 /3 /5 /8 38+38,40+40, 41+41,39+41 "1+1, 3+3, 7+7 ,
3+7, 3+20, 3+8,
1+20, 1+8, 7+20, 7+8,
"
General Features
HW Basic information CPU ASR PXA1826, ARM Contex A7, 1.2GHz
RAM 1Gb LPDDR2
ROM 2Gb Nand flash
RF Band (default) LTE-TDD: 38/40/39/41n; LTE-FDD : 1 /2/3 /5/7 /8 /12/20; UMTS:1/2/5/8 ; GSM:2/3/5/8
Wifi 11n 2X2, 11ac 2x2
Power features Working Voltage Battery: 3.3-4.35V
Input Voltage range 3.2~4.5V
Battery 3.8V, 3000mAh
Max sdandby hours 500h (depending on the network)
Max working time 13h (depending on the network)
Working Power 1.5~2W
Max working Power 2.5~3W
Port/Interface SIM Form Factor
Voltage
others

Others
T-Flash Card supported,max 64GB
Key Power,WPS Key,Reset key
LCD/LED 1.4'LCD, 128*128
"Wifi: YG (2.4G, 5G)
Network: YG/Red
Power: YG/Red"
USB USB protocal /
USB port micro USB
Power input 5V/1~1.5A
Power supply without Battery supported
Antenna Wifi antenna 2.4G and 5G SMT
RF Antenna Pifa
Environmental Characteristics standard working temperature 0 ℃~+35℃
Extreme working temperature -5 ℃~+40℃
Storage Temperature -20℃~+45℃
Operating humidity 5%~95% (non-condensing)
WAN
RF Capability LTE Chipset ASR 1826
LTE Channel Bandwidth 1.4/3/5/10/15/20/40 MHz
Modulation Downlink QPSK/16-QAM/64-QAM
Uplink QPSK/16-QAM
LTE Authentication EPS-AKA
Adaptive Modulation and Coding Supported
MIMO support Support both MIMO 2x2 and 4x2
Idle Mode Supported
Sleep Mode Supported
Idle Mode Signaling Reduction (ISR) Supported
Power Level TDD-LTE Power Class 3(23 +/-3dBm)
FDD-LTE Power Class 3(23 +/-3dBm)
TD-SCDMA /
UMTS Power Class 3(23 +/-2dBm)
EDGE Power Class E2(GSM850/900:33dBm;DCS/PCS:30dBm)
GPRS Power Class E2(GSM850/900:27dBm;DCS/PCS:26dBm)
Sensitivity TDD-LTE -94 dBm(20MHZ) @ 2 antenna
FDD-LTE -93 dBm(20MHZ) @ 2 antenna
TD-SCDMA /
UMTS -106 dBm @ 1 antenna; some bands can be supported 2 antenna to improve sensitivity
EDGE GSM850/900:-98dBm;DCS/PCS:-98dBm
GPRS GSM850/900:-101dBm;DCS/PCS:-99dBm
Data Rate TDD-LTE CA 3GPP R10 ,Category 6, DL 300Mbps UL 100Mbps
FDD-LTE CA 3GPP R10 ,Category 6, DL 224Mbps UL 100Mbps
TDD-LTE 3GPP R10 ,Category 4, DL 150Mbps UL 50Mbps
FDD-LTE 3GPP R10 ,Category 4, DL 112Mbps UL 10Mbps
TD-SCDMA /
UMTS 3GPP R7 DL 21.6Mbps UL 5.76Mbps
EDGE/GPRS EGPRS Class12 DL 237kbps UL 118Kbps GPRS Class12 DL 85.6kbps UL 42.8kbps
Certification 3GPP Conformance Compliance






UE Certification Device Operator TA Without
Device Reginal Certificate Without
Device Country 1 Certificate Without
Device Country 2 Certificate Without
WIFI Certificate NO
Battery general certificate MSDS+UN38.3
Battery country certificate Without
Charger Certificate Without
LAN
WIFI Chipset Broadcom 4356 Certificated by All Operators
WIFI info WLAN Mode
Frequency Band
WLAN Channel supported
Antenna Type
Supported Security
WIFI MIMO 2x2
Power Level WIFI IEEE 802.11b 13dBm
WIFI IEEE 802.11g 11dBm
WIFI IEEE 802.11n 10dBm(2.4GHz), 10dBm(5GHz)
WIFI IEEE 802.11ac 10dBm
Sensitivity WIFI IEEE 802.11b(11M) -76dBm@ 8%BER, 11Mbps
WIFI IEEE 802.11g(54M) -65dBm@ 10%BER, 54Mbps
WIFI IEEE 802.11n(72.2M) -64dBm@ 10%BER, 65Mbps
WIFI IEEE 802.11ac(866M) -64dBm@ 10%BER, 65Mbps
Data Rate WIFI IEEE 802.11b 11/5.5 Mbps
WIFI IEEE 802.11g 54/48/36/24/18/12/9/6 Mbps
WIFI IEEE 802.11n(HT20) "MCS0–MCS7; Up to 72.2 Mbit/s.
MCS8–MCS15; Up to 144.4 Mbit/s.
"
WIFI IEEE 802.11n(HT40) "MCS0–MCS7; Up to 150 Mbit/s.
MCS8–MCS15; Up to 300 Mbit/s."
WIFI IEEE 802.11ac up to 867 Mbps
Reception range Coverage range indoor:15 m; outdoor:30m
System
2G/3G/4G setup Network Selection Manual, Auto Supported
Setup by user Supported
SMS SMS over SGs Func at LTE Supported
SMS's receiving and reading Supported
APN setup APN setup and revise Supported
PIN Func PIN:Save, revise, lock,unlock Supported
Modem Func Connect to PC by USB Supported
Automatically connect reconstructed Can automatically reconnect to network after off-network in data using Supported
WIFI setup Protocol Max users 16 Supported
"DHCP client / server, you can set whether to activate the DHCP service assigns IP addresses starting and ending addresses, set the gateway address;
Support client list: Displays all the DHCP server to obtain IP address of the host, including MAC address, IP address obtained" Supported
Support terminal IP address, SSID, communication channel, security type, the administrator account and password factory setting Supported
Support SSID and channel settings: Set SSID, communication channel (frequency band WiFi settings, select the range of WiFi support of the band all the available channels), WIFI function on/off, and the SSID broadcast on/off Supported
Provides WEP128, WPA-PSK, WPA2-PSK, etc. Supported
Support MAC and IP filtering Supported
Other setup Driver setup With the PC operating system automatically recognizes, supports drivers installed automatically Partly Supported
Web Server WEB UI Supported
Administrator password configuration Terminal preset default administrator password, supports password changes Supported
SW update Support local upgrade the firmware of the terminal Supported
Time setup Set user location's time Supported
Recovery Support the terminal restore all settings to the factory default state Supported
Reboot Reboot by SW Supported
Operator lock Software locking(can customization hardware locking) Supported
Online help This menu item provides the user with the help of the course, descriptive information Supported
HTTP upgrade Local HTTP server prefered Supported
OTA (HTTP/TR069) HTTP/TRO69 Supported
System Log Display system during operation log information generated. Easy for users to understand the equipment through query log system events that have occurred on. Allows the user to clear the log operation Supported
Connection-based Hostless
Plug & Play Supported
PC OS Win7/WinXP Supported
MAC OS Supported
Windows8 Supported
Android Supported
LINUX Supported
Accessory Charger Without
Data cable Without
Package box & Label Without