The whole structure of Press Brake 1. Hydraulic system - Adopt integrated hydraulic control system, more reliable and easy for maintenance. Hydraulic system is from Rexroth, Germany. - All pipes, flange and joint with vibrations proof and leakage proof design and setting. - All seals in cylinder is DZ from Taiwan, the most famous brand, good quality and high performance. - Overload overflow protection is outfitted to hydraulic system, which can assure no leakage, and the oil level can be read or seen directly. - The hydraulic system is made in compliance with current regulations. 2. Electrical system - Electrical Cabinet under the standard of IP55, Electrical under international CE Standard, safe and reliable, strong anti interference capability. - Protective fence and the safety interlock to ensure the operation safety. Have a movable single-hand pedal switch, easy to operate. - Front Side Covers with safety switches, Back light safety guards, Foot pedal conforming to CE regulation. 3. Synchro control system - Patented hydro-mechanical system for exact parallelism and a high repeat accuracy. - The worktable adopts the particular design, reducing the crowning distortion amount of lower tool effectively. - Adopt steel torsion bar synchro system, simple in structure and high in accuracy, ensures the parallelism between beams is used for the synchronism. 4. Mould and dies - The equipped standard Dies, special non-standard mold is available under client's requirement according to real workpiece situation. - Upper and buttom die can be sectioned according to customer’s requirement. 5. Backgauge - Back gauge fingers with two gauging steps used one for short and the other for long bending depths. - Back Gauge positioning fingers move along linear bearings with ±0.05 mm. positioning tolerance.