Description:
Its main area of application is the front hub bearing of VAZ 1118, 2190 and other models of this series produced by the
Togliatti Automobile Plant. It has the following design characteristics - ball, angular contact, double row, closed type (seals on
both sides and with plastic lubricant). Since it has two rows of rolling elements, it is able to fix the shaft under axial load in
both directions. There is a roller analogue of this bearing - 537807, it has a higher carrying capacity, but a lower rotation
speed, its use, perhaps, is more expedient on our roads, which are not distinguished by an even surface. The smaller bearing
256706 is installed in the rear hubs of the predecessor models Granta and Kalina. Full product marking - 6-256707EK12 or AEKL20
(there may be others, first of all, Vologda ones, but, by and large, there is not much difference)
256707EK12can be expanded as follows:
25 - version (double row with contact seals);
6 - angular contact ball bearing;
7 - a series of outer diameters;
07 - coding of internal size (d / 5);
E - Plastic separatorK12 - Redesigned internal bearing design
Specifications Designation: 256707 Е Internal diameter, mm: 35 Outer diameter, mm: 68 Technical data from the manufacturer's
catalog: Inner diameter (d) - 35 mm. Outside diameter (D) - 68 mm. Width (height) (B) - 37 mm. Outer cage width (C) - 37 mm.
Weight - 0.578 Kg Number of raceways - 2 Seal - Yes