Product Details

The answer is No, because the jumbo bag is made from woven fabric, the bag does not have the feature of water resistance. Some customers may prefer a coating or lamination as a moisture barrier, but this barrier is limited to a certain amount of moisture. The transportation process still needs extra protection since it's not 100% moisture-proof. Most of the efforts were made to increase the carrying capacity.
According to the local climate and specific storage conditions, we can customize the lamination. Therefore, as we said earlier, jumbo bags are designed for carrying dry products instead of wet products. If you are looking for a solution, particularly for wet products, don't hesitate to contact us and send us inquiries.

Mr.Daniel

Mobile Phone:+86-13802155833

WeChat:+86-13802155833

WhatsApp:+86-13802155833

E-mail: tjwoking@163.com

6. What is the method to pick up jumbo bags?

There are two lifting belts laminated on both sides of the bag. In the process of transferring, it can be easily picked up by lifting machines through the belts. There are some guidelines as to how to safely lift the jumbo bag.First, you should ensure the bag itself is not damaged. The design of such a bag is to carry heavy dry products, so normally it can withstand day-to-day wear. But you still need to handle it with care.Secondly, make sure the maximum weight of the forklift is compatible with the weight of a full-load jumbo bag. if not, you are going to face the risk of unnecessary mechanical damage.

7. How can I empty an FIBC bag? Transportation is only a part of the whole system, in the final stage, we are facing problems of how the products in the jumbo bag can be discharged safely without wastage.The most traditional way of discharging a jumbo bag is through a discharge spout, which is added to the bottom of the bag. Usually, the discharge spout is tucked inside a closure on the bottom of the bag.
The closure is sometimes called a petal closure, pajama closure, star, or x-cut closure. The closure is designed to protect the spout and to prevent the product from sifting out of the discharge before its intended discharge. Discharge spouts can be customized with specific sizes and closures.There are several ways as to methods of discharging bulk bags.The first and most common one is gravity. This is a fairly easy way to empty the bag because you just need to open the discharge spout and let the products flow to the intended unloading area. However, the flaw in this method is that you cannot control the amount of material to be released.Second, some jumbo bags don’t have a discharge spout therefore the discharging process requires manual work by using a C-shaped cutting on the bottom of the bag. The disadvantage is also obvious. Once the bag is cut open, it cannot be reused but discarded

8. Can I use a jumbo bag more than once?The answer is YES, many jumbo bags can be reused several times concerning their integrity.However, we do not recommend the jumbo bag be reused too many times because after carrying a heavy load of products, it has the possibility of breakage and aging. This will affect the capacity of the jumbo bag and greatly increase the risk of leakage.9. What does coating mean for FIBC?The coating is a common method that is used to add extra features to the bags.For example, we can add a moisture-proof barrier to the film. The lamination provides a moisture barrier to protect the contents of the bag from moisture.Many industries need such a feature since a jumbo bag is made from woven polypropylene which has gaps so that the bag is not "waterproof". There are also many other features that could be laminated to film. For example, there are oxygen barriers, printable coating, and so on.10. What is a duffel top?Before getting to know what is a duffel top, we must know what is a bulk bag.Bulk bag, also known as Flexible intermediate bulk container, are one kind of bag used to transport dry, heavy products such as sand, grain, powders, fertilizers, etc.This is an ideal packaging solution because they are easy for machines to lift and transport from one place to another.When it comes to a duffel top, we are talking about a special feature that is added on the top of the bag.Basically, there will be an extra panel added on the top of the bag. They are like a lid with same width and length.The lid With such a lid on top, it makes the content in bag less easy to spill, which in turn greatly increased its safety during transportation.Consequently, this will reduce material loss during transportation. Long term speaking, this is a cost-saving solution.11. What is the difference between duffel top and open top?

As we explained earlier, both open top and duffel top are all common features of a bulk bag.With regard to open top, you can imagine it as a container without a lid. This is a relatively economical packaging as there is no extra features.
However, the overall strength of an open bag is as strong as other kinds of bulk bags. If you are looking for a relatively cheap packaging solutions, this one is good for you.

Mr.Daniel

Mobile Phone:+86-13802155833

WeChat:+86-13802155833

WhatsApp:+86-13802155833

E-mail: tjwoking@163.com

12. What is a fill spout?Here we are going to talk about the third most common feature of bulk bag, which is fill spout.Fill spout bag, or spout top bulk bag, is a common feature that includes panel on the side as well as a spout on top of the bag.
This is an even smaller opening compared to the other two bags. The small spout offers a waste-free filling process.Don’t worry, the size of the spout is customizable, meaning that it can be designed to meet your specific filling requirements.
Normally, A spout open bulk bag is made especially for powdered material. This is easy to understand that the smaller the open is, the more it gets protection.
As a result, spout open bulk bag is always used for containing cement, resin, food ingredients and other powdered products.