Coiled Stainless Steel Tubing

Coiled tubing allows for the installation of long-length tubes without the need for joining fittings. This reduces installation time and costs as well as eliminates potential leak points. PAC Stainless stocks both seamless (ASTM A269/A213, ASME SA213 average wall) and welded (ASTM A269/A249) tube coils to meet the needs of petrochemical, CNG, geothermal and flow measurement applications.

LENGTH CAPABILITIES

TS Stainless can provide coiled tubing in long mill lengths that stretch over a mile, or in custom cut-to-length sections as short as fifty feet. Short, long, and everything in between – let us be your preferred source for coiled stainless steel tubing products.

Product Specifications 

Welded Coil Tube (BA Tube)

- Material: TP 304/304L, 316/316L, 201, 202, 310S, 321, 800, 600, etc.

- Tube delivery condition: bright annealing (BA)

- Tube type: weld, TAW

- Coil Lengths: max 3000 m per coil tube

- Standard: ASTM A269, A249

- O.D. from 3 to 25.4mm

- W.T. from 0.3 to 2.0mm

Chemical composition:

in accordance with ASTM A269

Mechanical and technical properties:

in accordance with ASTM A269

Soft annealed max. Hardness 150 HV10 Tolerance +10 points

Model type and surface integrity:

in accordance with ASTM A269

Surface roughness Ra <5 μm

Cleanliness of the tubes:

bore cleanliness in accordance with DIN 8905. The coils shall be dry, clean, and free from swarf, drawn, and roller marks.

Pressure Test:

100% tested at the appropriate pressure stated under water.

All coils must be flushed and dried after pressure testing to avoid contamination.

Tolerance:

D4/T4, Diameter of the ball for ball bearing check

Coiled Tubing

A cost- and time-effective solution for well-intervention operations employs coiled tubing. Instead of removing the tubing from the well, which is how workover rigs fix the problem, coiled tubing is inserted into the tubing against the pressure of the well and during production.

The coiled tubing is a continuous length of steel or composite tubing that is flexible enough to be wound on a large reel for transportation. The coiled tubing unit is composed of a reel with coiled tubing, an injector, a control console, a power supply, and a well-control stack. The coiled tubing is injected into the existing production string, unwound from the reel, and inserted into the well.

Coiled tubing is chosen over conventional straight tubing because conventional tubing has to be screwed together. Additionally, coiled tubing does not require a workover rig. Because coiled tubing is inserted into the well while production is ongoing, it is also a cost-effective choice and can be used on high-pressure wells.

Key Benefits

Improved system safety and reliability – Restricted tolerance controls yield superior sealing performance.

Xtreme™ length – up to 30% longer continuous length compared to competitive options

Significantly reduced installation costs – Installing continuous-length, seamless CNG Tubing takes much less time and effort than welding lengths of stick tubing.  

Improved system safety and reliability - Using one continuous run of tubing eliminates potential leak points.

Product Identification - Wall thickness, maximum allowable pressure, tubing size, and thickness are printed on the layline of the tube. This allows installers to identify the correct tubing used in their application.

Better Corrosion resistance - With a 2.5% min. moly. CNG Plus tubing has superior corrosion resistance over standard stainless steel tubing.

Traceability – All material is fully heated and lot traceable, allowing us to track products from raw material to finished goods.

100% testing for reliability and safer installation - Every foot of CNG Plus Tubing undergoes 100% hydrostatic testing and positive material identification.

Specifications – Restricted Tolerance Controls

- OD Tolerance: +0.005/-0 in.

- Hardness: Maximum 80 HRB (Rockwell)

- Wall Thickness: ±10%

- Chemistry: Min. 2.5% Molybdenum

Certifications

- ASTM A269, Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

- ASTM A213, Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tube

- Pressure Equipment Directive (PED) 97/23/EC

- ISO 9001

- NACE MR0175

- EN 10204 3.1

We provide a wide range of tubular product forms and materials mainly for the oil & gas sector. Our products have been successfully used in some of the most aggressive subsea and downhole conditions and we have a long proven track record of supplying products that meet the strict quality requirements of the Oil & Gas and geothermal energy sectors.

Improvements in the technology for the enhanced exploitation of oil and gas fields have increasingly required the use of long continuous lengths of stainless steel and nickel alloy tubulars for hydraulic control, instrumentation, chemical injection, and umbilical and flowline control applications. The benefits of this tubular technology have resulted in reduced operating costs, improved recovery methods, and reduced capital expenditure by connecting downhole valves and chemical injection with remote and satellite wells to a fixed or floating central operating platform.

Applications

• Downhole hydraulic control lines.

• Downhole c

MEILONG TUBE provides a wide range of tubular product forms and materials mainly for the oil & gas sector. Our products have been successfully used in some of the most aggressive subsea and downhole conditions and we have a long proven track record of supplying products that meet the strict quality requirements of the Oil & Gas and geothermal energy sectors.

Improvements in the technology for the enhanced exploitation of oil and gas fields has increasingly required the use of long continuous lengths of stainless steel and nickel alloy tubulars for hydraulic control, instrumentation, chemical injection, and umbilical and flowline control applications. The benefits of this tubular technology have resulted in reduced operating costs, improved recovery methods, and reduced capital expenditure by connecting downhole valves and chemical injection with remote and satellite wells to a fixed or floating central operating platform.

Materials

• Austenitic steel 316L

• Duplex 2205

• Super Duplex 2507

• Incoloy 825

• Inconel 625

Applications

• Downhole hydraulic control lines.

• Downhole chemical control lines.

• Subsea control lines for hydraulic power and chemical injection.

• Smoothbore control lines used in fibre optic applications.

Production process

Coiled tubing is available in a range of different product forms depending on the customer's requirements. We manufacture seam-welded and redrawn, seamless tube products. The standard grades are 316L, alloy 825, and alloy 625. Other grades of stainless steel in duplex and super duplex and nickel alloy are available on request. Tubing can be supplied in the annealed or cold-worked condition.

• Seam-welded and redrawn tubing.

• Seamless and redrawn tubing.

Dimensional range

• Diameter from 3.18mm (0.125’’) to 25.4mm (1.00’’) OD.

• Wall thickness from 0.51mm (0.020’’) to 3mm (0.118”).

• OD tolerance +/- 0.005’’ (0.13mm) and +/- 10% wall thickness. Other tolerances are available on request.

• Coil lengths up to 1500m (5,000ft) without orbital joints depending on product dimensions.

• Coil lengths up to 13,500m (45,000ft) with orbital joints.

• Encapsulated, PVC coated, or bare line tubing.

• Available on wooden or steel drums.

Hot Tags: coiled steel tube, China, suppliers, manufacturers, price