125720-01125720-01125720-01125720-01125720-01125720-01125720-01125720-01125720-01125720-01125720-01125720-01125720-01125720-01125720-01125720-01125720-01125720-01125720-01125720-01125720-01125720-01125720-01125720-01125720-01125720-01125720-01125720-01125720-01125720-01125720-01125720-01
Bently 3500 configuration requirements

Each key compressor unit is equipped with Bentley 3500 fra

ently redundant 3500/15 power module

Bently 3500/22M Transient Data Interface Module (RJ45 network interface)

Bently 3500 rack of each unit is configured with corresponding 3500/25 Keyphasor module

Reciprocating compressor crankcase vibration, crosshead vibration, and bearing vibration are equipped with corresponding 3500/70M monitor modules

The measuring point of piston rod position shall be configured with corresponding 3500/72M monitor module

Noise source of displacement sensor

Runout – electric deviation alloy element non-uniform conductivity non-uniform magnetic conductivity non-uniform axis material local stress concentration There is a local magnetization area on the axis

Noise source of displacement sensor

BENTLY 3500/22M-01-01-01 

BENTLY 3500/22M 288055-01 

BENTLY  3500/22M  

BENTLY 1900/65A 

BENTLY 1900/65A-01-01-01-00-00 

BENTLY 3500/53 

BENTLY 3500/70M 

BENTLY 3500/15 

BENTLY 3500/42M 

BENTLY 133819-02 

BENTLY 3500/60 

BENTLY 3500/72M 

BENTLY 3500/40M（140734-01） 

BENTLY 135473-01 

BENTLY 3500/20 

BENTLY 3500/61 

BENTLY 135489-04 

BENTLY 3300/16-11-01-03-00-00-01 

BENTLY 330130-045-00-00 

BENTLY 1900/55 

BENTLY 3500/92 

BENTLY 3300/20-12-01-03-00-00 

BENTLY 3500/