Specifications Inputs Power Consumption 10.5 Watts Data Front Panel USB-B 10Base-T/ 100Base-TX I/O 10Base-T or 100Base-TX Ethernet, autosensing 100Base-FX I/O 100Base-FX Fiber-Optic Ethernet Outputs Front Panel LEDs OK LED Indicates when the 3500/22M is operating properly TX/RX LED Indicates when the 3500/22M is communicating with the other modules in the rack TM LED Indicates when the 3500 rack is in Trip Multiply mode CONFIG OK LED Indicates that the 3500 rack has a valid configuration I/O Module OK Relay Function Indicates when the 3500 rack is operating normally or when a fault has been detected within the rack. User can select either an “OPEN” or “CLOSED” contact to annunciate a NOT OK condition. This relay always operates as “Normally Energized”. Ratings Standard OK Relay is rated to 5A @ 24 Vdc/120 Vac, 120 Watts/600 VA Switched Power (maximum) OK Relay with gold-plated contacts is rated down to 1 mA @ 1 Vdc (minimum) Arc Protection Arc suppressors are provided. Controls Front Panel Rack reset button Clears latched alarms and Timed OK Channel Defeat in the rack. Performs same function as “Rack Reset” contact on I/O module Address switch Used to set the rack address: 127 possible addresses Configuration Keylock Used to place 3500 rack in either “RUN” mode or “PROGRAM” mode. RUN mode allows for normal operation of the rack and locks out configuration changes. PROGRAM mode allows for normal operation of the rack and also allows for local or remote rack configuration. The key can be removed from the rack in either position, allowing the switch to r

If you need to inquire or purchase ,please send the product models to my email or call me directly .

Contact detail:

Mobile/ WeChat/ WhatsApp:+86-133 6590 9307

E-mail:1851269046@qq.com

Skype: +86 133 6590 9307

QQ: 1851269046

Contact:   Simon Zhang