1800w display hdpe geomembrane welding machine

     CL900 series geomembrane welding machine with a display controller is small, light, high welding efficient. Which can weld geomembrane of various thickness and are applicable for welding of all thermal-fused material such as LDPE, PVC, HDPE, EVA, PP and so on

 

    This series of welding machine is excellent in performance and easy for operating, with high welding speed and good work quality. It is extensively used in engineering projects such as expressways, tunnels, reservoirs, waterproof of construction and so on .

Operation principle

Motor drives upper and lower pressure rollers to rotate through reduction gearbox and chain . Slide carriages drive the hot wedge and insert it between the two base materials , at the same time lever presses pressure rollers and engages the two fused base material

Technical data

Votage	220V
Power	1800W
Frequency	50HZ/60HZ
Heating temperature	0-450°C
Thickness of material	1mm-3.5mm
Overlap width	120mm
Welding width	15mm×2, interior cavity 15mm
Gross weight	19Kg
Seam strength	≥85% base material (tensile resistant in shear direction)

Precautions

1.Use with grounded 3 cords mains cable and socket , plug will not be modified without prior permission

2.For good welding quality , please assign specified personnel for operation

3.Pressure roller will not engage on free running

4.Do not operate when it is exposed to water to prevent inferior quality

5.The machine has been regulated before leaving factory . Please don’t adjust it at all .

6.Preheat for 30 minutes before start up .

Supplied Accessories

1. Hot wedge

2. Steel pressure wheel

3. Temperature controller

4. Relay