Universal garage door remote control door opener electric door remote control key remote programmable learning code 433MHZ
Negotiable
Min.Order:1
Shenzhen Fengbaode Electronic Technology Development Co., Ltd.
433MHZ metal 4 key ordinary face-to-face copy clone wireless RF remote control for automatic door
1 |
Working voltage |
DC3V(2032 twist battery) |
2 |
Working curren |
<=12mA |
3 |
working frenquency |
315MHz/433MHz/868MHz and other for optional |
4 |
Transmit powe |
>=10mW |
5 |
Transmission Speed |
50-60KHZ |
6 |
Frenquency Windage |
±0.2MHz |
7 |
Transmission distance |
100 meters(Open space) |
8 |
Oscillation resistance |
As customer’s request |
9 |
OEM & ODM |
YES |
10
|
Chip and Operating mode
|
Learning code(1527,2240,HT6P20B,HT6P20D etc) |
Fixed code (2260,2262 etc) |
||
Hopping code(HCS301,300,200 etc.) |
||
Copy code(Face to face) |
FBD-04KA Universal Duplicate Remote with 433.92Mhz
Other frequency bands can be selected according to customer requirements (303MHZ, 315MHZ, 390MHZ, 430MHZ, 350MHZ)
The function replicator remote control is suitable for; smart home, door lock, LED lights, motorcycle anti-theft system, car anti-theft system, automatic door, garage door motor remote control switch or other security products.
Chips could be copied
2260 (all manufacturers); 2262 (all manufacturers); PT2264, 5326 (all manufacturers); SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918series, 527 (all manufacturers); 1527 (all manufacturing) Business); 2240 (all manufacturers);
HCS encryption chips and other encryption chips cannot be copied.
Note: If you press the remote control but there is no indicator light, don't worry, it is not damaged. Each remote will be checked before sending. To resolve this issue, you need to follow the steps below.
1. Code cleaning method:
Pressing the unlock button and the lock button at the same time does not release the hand (some cases are up button and down button), and the LED indicator will flash continuously. At this point, all stored data will be cleared, no matter which button you press, the LED of the clean remote control will flash and then go out.
2. Copying method
Keep the original remote control with one hand and the copy remote control with the other hand. Place the two remotes as close as possible (ideally by placing the two remotes side by side on the table at zero distance) Press the Copy button. When the LED indicator flashes continuously, it indicates that the copy is successful, and other key operations are the same. Some remotes have a low transmit power, so the original remote should be placed back in the copy remote for operation. In the case of noise, avoid interference with the operation; if the copy is unsuccessful, copy it again after clearing the code.
3. New copy remote control function
These four buttons can be used to copy four different types of chips, which means that the remote can operate four different types of devices. Copying data is faster, it's not easy to lose code, and it's far away.
4, reproducible garage doors, retractable doors, road gates, parking locks, burglar alarms are common brands:
note:
1; If the copy fails with the correct operation, you may have to check if there is a chip above the device.
HCS encryption chip and other microcontroller chips cannot be copied.
2;If done correctly, can use directly. If not, or individual button not useful, please turn to clean and copy again, notice the change of light during operation. If problems still exist after attempting several times, check the chip and frequency of original remote control again, and contact us.
We have strong cooperation with DHL,TNT,UPS,FEDEX,EMS,China Air Post.
You also can choose your own shipping forwarder
1. Your inquiry can be replied in 12 hours.
2. All your questions can be answered by our well-trained and experienced staff in English.
3. Any your customized products we can help you to design and put into production.
4. Protection of your sales area, ideas of design and all your private information.
5. Delivery by DHL, UPS, EMS or by sea as your requirements.
1. Could I order one piece for sample to test the quality?
A: Yes, You could order the sample before your order. We recommend to check the sample before order, to make sure you will get the indeed product that you need.
2. What time can you deliver my order?
Samples in 5-7 working days, bulk order in 7-15 working days after payment.
3. What's your best price?
We make different models and different chip, please advise detailed parameters for goods that you need.
4. Do you have gurantee for my order?
Remote control and receiver gurantee for 1 year