Frequency converter, buy Anchuan V1000 Frequency Converter CIMR-VB4A0002/0004/0005/0007/0009/0011BBA on China Suppliers Mobile

Product Details

Product Description

New Anchuan Frequency Converter V1000

Anchuan frequency converter is well received for its high performance, high function and high quality. Nowadays, V1000 frequency converter with more applicability and convenience is born.

（Product model, product specification information and inquiry, contact customer service for negotiation）

Specification

Capacity Range	200V Class (3-phase power supply) 0.1-18.5KW 200V (single-phase power supply) 0.1-5.5KW 400V (3-phase power supply) 0.2-18.5KW
Scope of application:	Conveyor: conveyor belt, electric gourd, hoist Civil machinery: shutter door Fluid machinery: fan, water pump Air conditioner:compressor
Control characteristics
control mode	Select from the following methods No PG vector control (current vector), no PG V / F control, no PG vector control for PM (applicable to SPM and IPM)
Frequency control range	0.01～400 Hz
Frequency accuracy (temperature fluctuation)	Digital input: within ± 0.01% of the maximum output frequency (- 10 ~ + 50 ℃) Analog input: within ± 0.1% of the maximum output frequency (25 ℃± 10 ℃)
Frequency setting resolution	Digital input: 0.01 Hz Analog input: 1 / 1000 of the maximum output frequency
Output frequency resolution (operational resolution)	20 bit of maximum output frequency (set value of parameter e1-04)
Frequency setting signal	Main speed frequency command: dc0v ~ + 10V (20k Ω), 4 ~ 20mA (250 Ω), 0 ~ 20mA (250 Ω) Main speed command: pulse sequence input (maximum 32 kHz)
Starting torque	200% / 0.5 Hz (without PG vector control, Im below 3.7 kW, HD rated timing), 50% / 6Hz (without PG vector control for PM)
Speed control range	1: 100 (without PG vector control), 1:20 ~ 40 (without PG V / F control), 1: 10 (PG free vector control for PM)
Speed control accuracy	± 0.2% (without PG vector control) * 1
Speed response	5 Hz (20 ℃± 10 ℃) (without PG vector control) (during self-learning of rotating shape: except for temperature fluctuation)
Torque limit	(set with parameters, which can be set separately in 4 quadrants only when there is no PG vector control)
Acceleration and deceleration time	0.00 ~ 6000.0 seconds (acceleration and deceleration are set separately: 4 kinds of switching)
Braking torque	① Short time average deceleration torque * 2: motor capacity 0.1/0.2kw: more than 150%, 0.4/0.75kw: more than 100%, More than 50% for 1.5 kW and more than 20% for 2.2 kW (about 40% for over excitation braking / high slip braking) ② Continuous regenerative torque: about 20% (when connecting the option of braking resistor * 3, about 125%, 10% ed, 10 seconds, built-in braking transistor)
Voltage / frequency characteristics	Fixed V / F curve can be made or selected arbitrarily
Protection function
Motor protection	The motor is protected against overheating by the output current
Instantaneous overcurrent protection	Stop when the rated output current of HD is more than 200%
overload protection	150% of rated output current stops at 60 seconds (hd) * 4
Overvoltage protection	Class 200V: stop when the DC voltage of the main circuit is above 410v 400V level: stop when the DC voltage of the main circuit is more than 820v
Low voltage protection	Stop when the DC voltage of the main circuit is lower than the following value About 190V (three-phase 200V), about 160V (single-phase 200V), about 380V (three-phase 400V), about 350V (three-phase 380V)
Instantaneous power failure	Stop when the compensation is more than 15 ms (factory setting). According to the parameter setting, the power failure will be restored in about 2 seconds and continue to run * 5
Heat sink overheating protection	Protected by thermistor
Brake resistor overheat protection	5.5 kW, 7.5 kW: detect overheating of braking resistor (3% ED)
Stall prevention	During acceleration and operation: the action current value can be set respectively through parameters, and you can also select Yes and No. During deceleration: only yes and no can be selected.
Ground short circuit protection	Protection via electronic circuit * 6
Display during charging	The charging indicator light turns on before the DC voltage of the main circuit reaches below about 50V
environment
Installation site	Indoor
Ambient temperature	- 10 ~ + 40 ℃ (closed wall mounted type), - 10 ~ + 50 ℃ (cabinet mounted type)
Humidity	below 95rh% (no condensation)
Storage temperature	- 20 ~ + 60 ℃ (short time temperature during transportation, etc.)
Altitude	below 1000M
Vibration	9.8 m / S2 below 10 ~ 20 Hz, 5.9 M / S2 below 20 ~ 55 Hz
Applicable safety standards	·UL508C ·EN61800-3，EN61800-5-1 ·ISO13849-1 Cat. 3 PLd，IEC61508 SIL2
Protective structure	Cabinet mounted type (IP20), closed wall mounted type (nema1: optional)

Product features

Simple!

Can be set by purpose!

●Suitable parameters can be set automatically by selecting the use of water supply pump, conveyor belt, air supply and exhaust fan, etc. The trial run time is shortened.

Via a copy device with USB It is easy to set up multiple frequency converters.

●It is easy to set up multiple frequency converters.

●By using a copy device with USB (optional), the parameter settings of the frequency converter can be simply copied to other frequency converters.

●With a USB converter, you can connect to the computer's USB port.

With the help of computer, make adjustments and maintenance easier

●If DriveWizard, an engineering tool for frequency converters, is used, the parameter settings of multiple frequency converters can be managed by a computer.

●In addition, it is equipped with mode operation and oscillographic function to make the adjustment and maintenance of frequency converter easier.

Compliance with safety standards

●The standard is equipped with EN954-1 Cat. 3 and the security input function of IEC/EN61508 SIL2. It also reduces peripheral equipment, so it can easily meet the mechanical safety standards.

Drive Replacement Function

Supports driver substitution such as automatic transformation of parameters from the original product VS Mini V7.

Parameter Editing

You can display and edit the frequency converter parameters.

Examples of monitoring oscillographic operation

Real-time display of running monitoring data.

MINIATURIZE!

Smaller

By using thermal simulation technology, the parts with high reliability are reasonably laid out and miniaturized. Up to 70% reduction in volume (compared with previous products of our company), compact structure.

Side by side settings

Multiple frequency converters can be set side by side without interval, which can greatly reduce the control cabinet of the machine.

(Note) Load reduction is required in some cases

Packing & Delivery

FAQ

Q: Do you support customized manufacturing?
A: Yes,we can customized manufacturing according to customer's requirment. We support to OEM your own company display interface and logo.
Q: How long is your delivery time?
A: Generally it is 3-5 days if the goods are in stock. or it is 5-10 days if the goods are not in stock, it is according to
quantity.10-20 days if customized manufacturing.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample with sample price.
Q: What is your terms of payment ?
A: Payment<=2000USD, 100% in advance. Payment>=1000USD, 70% T/T in advance ,balance before shippment. If you have another question, pls feel free to contact us as below