GSK 208D CNC controller Numerical control system of woodworking engraving and milling machine Factory original
Negotiable
Min.Order:1
● High speed, high precision, complex curved surface processing, effective speed 8m / min, optimal processing speed 4m / min |
● The maximum positioning speed is 60m / min and the maximum feed speed is 15m / min |
● The number of pretreatment sections is up to 1000, with forward-looking function, high speed, high precision and good roughness |
● The system installation is divided into horizontal structure and vertical structure, with 8.4 inch and 10.4 inch high-resolution color LCD respectively |
● The newly designed man-machine interface is more beautiful, friendly and easy to use |
● Support Chinese, English, Russian, Spanish, Turkish and other languages |
● The operation panel specially designed for engraving and milling machine conforms to the user's habits |
● Support statement macro program (macro b), and the programming is more concise |
● Rich help and prompt information, easy to learn, easy to use and easy to debug |
● Support RS232, USB and network communication interfaces to realize file transmission, DNC processing and USB online processing |
● It supports GSK-Link (NCUC-Bus)) Ethernet bus function, with convenient connection and strong expansibility. It supports 17 bit absolute encoder, high precision, no return to zero, and can realize full closed-loop control (optional) |
● The standard I / O of the system is 24 / 24, and the excess is optional; The magazine is optional |
Motion control |
Control axis and linkage axis: the standard configuration is four axis and three linkage, and four axis and four linkage is optional. Each axis can be set as linear axis or rotating axis |
Interpolation mode: positioning (G00), straight line (G01), circular arc (G02, G03) and spiral interpolation |
Position command range: metric: - 99999.999mm ~ 99999.999mm, minimum command unit: 0.001mm |
English system: - 9999.9999inch ~ 9999.9999inch, minimum instruction unit: 0.0001inch |
Electronic gear: command frequency multiplication coefficient 1 ~ 65536, command frequency division coefficient 1 ~ 65536 |
Fast moving speed: maximum 60m / min, fast magnification: F0, 25%, 50%, 100% four-level real-time adjustment |
Cutting feed rate: up to 15m / min (G94) or 500.00mm/r (g95) |
Feed rate: 0 ~ 200%, 21 levels of real-time adjustment, band control |
Hand pulse feed: 0.001, 0.01 and 0.1mm; Single step feeding: four gears of 0.001, 0.01, 0.1 and 1mm 报错 |
Acceleration and deceleration |
Front acceleration and deceleration: linear acceleration and deceleration or S-type acceleration and deceleration can be selected, and the acceleration and deceleration time constant can be set |
Rear acceleration and deceleration: linear acceleration and deceleration or exponential acceleration and deceleration can be selected, and the acceleration and deceleration time constant can be set |
Among them, manual, hand pulse and single step methods adopt rear acceleration and deceleration. Fast positioning, cutting feed, optional pre / post acceleration and deceleration |
Auxiliary function |
Specify with address m and 2 digits, and the M function can be customized |
Internal m instruction code of the system (non redefinition): program end M02, M30; Program stop M00; Select Stop M01; Tool magazine calls M06; Subroutine call M98; End of subroutine M99 |
Standard PLC defined M instruction:M03, M04, M05, M08, M09, M10, M11, M16, M17, M18, M19, M20, M21, M22, M23, M24, M26,M27, M28, m29, M35, M36, M44, M45, M50, M51 |
Tool function |
● T and 4-digit tool selection ● 256 sets of tool offset values ● length compensation ● wear compensation ● C-type radius tool compensation |
Spindle function |
● S2 digits (I / O gear control) / S5 digits (analog output) ● maximum spindle speed limit. ● constant linear speed function |
Spindle encoder: the number of encoder lines can be set (100 ~ 5000P / R) Transmission ratio between encoder and spindle: (1 ~ 255): (1 ~ 255) |
Spindle magnification: 50% ~ 120%, a total of eight levels of real-time band adjustment |
Automatic compensation |
● pitch error compensation: the compensation interval and compensation origin can be set, and the compensation range is: - 999 ~ + 999 pulse equivalent |
● reverse clearance compensation: it can be set to compensate the reverse clearance of the machine tool in the way of fixed frequency or lifting speed |
● tool length compensation: type A or B length compensation function can be selected by parameters |
● tool radius compensation: C-type tool compensation function, the maximum compensation value is ± 999.999mm or ± 99.9999inch |
Reliability and safety |
Status signal: ● emergency stop ● overtravel ● stored travel limit ● NC ready signal ● servo ready signal ● MST function completion signal ● automatic operation start light signal ● automatic operation signal ● feed hold light signal |
Self diagnosis function: ● signal ● system ● position control ● servo ● communication ● spindle |
NC alarm: ● program ● operation ● overtravel ● servo ● connection ● PLC ● memory (ROM and RAM) |
Operation function |
● edit ● automatic ● MDI ● zero return ● manual ● single step ● hand pulse ● DNC ● single section ● skip section ● idle operation ● auxiliary lock ● program restart ● manual pulse interruption ● single step interruption ● manual intervention ● machine tool lock ● interlock ● feed hold ● cycle start ● emergency stop ● external reset signal ● external power on / off |
Display |
● the resolution of gsk208d-v system is 800 × 600 color 10.4 inch LCD. |
● the resolution of gsk208d-h system is 800 × 600 color 8.4-inch LCD. |
● five interfaces in Chinese, English, Russian, Spanish and Turkish are provided, which can be selected by parameters |
● location information ● user program ● system setting ● PLC ● diagnostic information ● system parameters ● graphics ● alarm information ● help |
● actual feed speed, spindle speed ● real-time waveform diagnosis ● system operation time and other NC commands and status information |
Program editing |
Program capacity: 58m, up to 400 programs can be stored |
● program preview ● program editing ● background editing; |
PLC function |
PLC processing speed: 3us / step; Up to 4700 steps; 10 basic instructions and 35 functional instructions; Ladder diagram online editing |
I / O unit input / output: 24 / 24, expandable |
Communication function |
Support RS-232 serial port, USB and network communication interface, and realize file transmission, DNC processing function (serial port, network) and USB online processing function |
Adaptive drive |
Guangzhou CNC GSK DA98 series, GS series digital AC servo unit, Ge series bus AC servo unit, etc |
GSK208D System | GSK 208D-H | 400mm×200mm Host unit,400mm×200mm operation panel,Horizontal split assembly structure Upper panel size W*H(mm):400*200 Opening size W*H(mm):390*190 Lower panel size W*H(mm):400*200 Opening size W*H(mm):390*190 |
GSK 208D-V | 290mm×420mm Host unit,290mm×260mm operation panel,Vertical split assembly structure Upper panel size W*H(mm):290*420 Opening size W*H(mm):280*210 Lower panel size W*H(mm):290*260 Opening size W*H(mm):200*280 |
Overall dimension | ||||||||
GSK988MA | GSK988MA-H | GSK988MB | GSK988MB-H | |||||
Host (width × High) | 260㎜×290㎜ | 400㎜×200㎜ | 290㎜×220㎜ | 290㎜×220㎜ | ||||
MDI panel (width) × High) | None (integrated on host) | None (integrated on host) | 290㎜×140㎜ | 230㎜×220㎜ | ||||
Machine panel (width) × High) | 260㎜×290㎜ | 200㎜×200㎜ | 290㎜×180㎜ | 290㎜×180㎜ | ||||
Additional panel (width) × High) | None | 200㎜×200㎜ | 290㎜×160㎜ | 230㎜×180㎜ |
Order model | Explain |
GSK 208D-H | 400mm×200mm Host unit,400mm×200mm Operation panel, horizontal split assembly structure |
GSK 208D-V | 290mm×420mm Host unit,290mm×260mm Operation panel, vertical split assembly structure |