CNC Controller, description about GSK 980TTi Guangzhou CNC dual channel lathe CNC controller on China Suppliers Mobile

Product Details

Product Description

GSK 980TTi
Numerical control system of double channel lathe

GSK980TTi is a new member of GSK980TD family. It is a bus product developed on the basis of GSK980TTC dual channel system. Based on gsklink industrial fieldbus, GSK980TTi is equipped with bus servo drive unit and servo motor of multi turn 25 bit absolute encoder as standard, which realizes 1nm position accuracy, on-line configuration of servo parameters and mechanical zero return without stop. At the same time, well-known experts in the field of industrial design were invited to make a new design for the appearance structure, which was refreshing. In addition, a lot of improvements have been made in efficiency improvement, intelligent application, humanized operation, user secondary development and so on.

（Contact customer service for product model and inquiry Price）

Specification

Characteristic:

2 channels, 6 feed shafts, 2 analog spindles, 2 encoder feedback, 2 hand pulses;

Based on GSK link industrial fieldbus;

The minimum moving unit is 1nm, and the maximum moving speed is 100M / min

Support dual spindle / dual tool holder, single spindle / dual tool holder, dual spindle and single tool holder applications;

It has unique functions such as simple synchronization control, hybrid control, overlap control, inter channel interference detection, waiting for M code and so on;

It supports online configuration of servo parameters and implementation of servo status

Number of control axes

Number of channels: 2

Maximum number of control axes: 6 axes

Number of control axes of each channel: 0-5 axes (parameter setting)

Maximum number of linkage axes of each channel: 5 axes (linear interpolation), 2 axes (circular interpolation)

Number of PLC control axes: 6 axes

Channel control

Synchronization control, hybrid control, overlap control, waiting for M code

Inter channel spindle control, inter channel one-way segment program detection, inter channel interference detection, inter channel common memory

Coordinate value (system) and size

Workpiece coordinate system (G50), local coordinate system, workpiece coordinate system 1-6 (G54-G59)

Coordinate plane selection

Position command range: ± 9999999 × Minimum input unit

Absolute increment programming, diameter / radius programming, imperial metric conversion, linear axis of rotation

Preparation function

It contains 74 g commands, including fast positioning, linear interpolation, circular interpolation, circular interpolation,
thread cutting, polar interpolation, rigid tapping, pause, drilling, macro program call, jump, cycle, thread repair, synchronous control, hybrid control, overlap control, etc

Feed function

Fast moving speed: 0 mm / min-100000 mm / min

Fast magnification: F0, 25%, 50% and 100% four levels of real-time adjustment

Cutting feed rate: 0 mm / min-15000 mm / min

Incoming magnification: 0 ~ 150%, 16 levels in total, real-time adjustment

Fast moving cutting feed acceleration and deceleration: linear and S-type. The starting speed, ending speed and acceleration and deceleration time of acceleration and deceleration are set by parameters

Bus function

Servo motor adapted to multi turn absolute position encoder

The absolute coordinate system is automatically restored after the machine tool is powered off

Mechanical zero return of machine tool without stop

Online modification of servo parameters

Servo status online diagnosis

Operation log, operation log and processing log

Remote monitoring and GSKLINK diagnostic functions

Thread cutting

Thread type: equal pitch straight thread / tapered thread / end face thread / circular arc thread, variable pitch straight thread / tapered thread / end face thread, equal tip width, variable lead screw

Number of thread threads: 1-99

Thread pitch: 0.01mm ~ 500mm (metric thread) or 0.06 tooth inch ~ 2540 tooth Han inch (British thread)

Acceleration and deceleration of thread cutting: linear type, exponential type and S type are optional

Thread tailing: tailing length, angle and speed characteristics can be set

Spindle function

Spindle speed: it can be given by s code or PLC signal, and the speed range is 0 rpm-999 rpn

Spindle magnification: 50% - 120%, a total of 8 levels of real-time repair and adjustment

2 channels of 0V ~ 10V analog voltage output, supporting dual spindle control, flexible tapping and rigid tapping

2 way spindle encoder feedback, and the number of spindle encoder lines can be set

Tool function

Tool length compensation (tool offset): 32 groups / Channel

Tool wear compensation: 32 groups

Tool life management: 32 groups (8 sets)

Tip radius compensation (type C)

Tool setting mode: fixed point tool setting, trial cutting tool setting, back to reference point tool setting, automatic tool
setting, coordinate recording function

Tool deviation execution mode: modify coordinate mode and tool movement mode

Auxiliary function

Special m codes (M00, M01, M02, M30, M98, M99, M100 ~ M199), and other m codes are defined by PLC

interface

8.4/10,4 inch true color LCD

Support Chinese, English and other languages

The processing track is displayed, the processing track is enlarged and reduced in real time, and the font of the program content can be enlarged and reduced

Position, program, tool compensation, alarm, parameters, settings, graphics, diagnosis, ladder diagram, help

Operation management

Operation mode: edit, automatic, input, mechanical zero return, manual pulse single step, manual, program zero return

Level 6 operation authority management

32 time limited shutdown

Program switch, parameter switch

Interruption of hand pulse and teaching

Machine tool function debugging and machine tool fault diagnosis

Regular maintenance function

Communication function

USB: USB disk file operation, direct processing of USB disk files, and support PLC program and system software USB disk upgrade

RS232: bidirectional transmission of part programs, parameters and other files, import and export of screw compensation parameters, and support PLC program update

LAN: remote file transfer

Safety function

Emergency stop, hardware travel limit, software travel check, data backup and recovery

Electrical interface

48 / 38 point digital input / output interface、2 encoder interfaces、2 handwheel interfaces、2 spindle analog interfaces, RJ45 network port 、 GSK-LNK network port

Overall dimension：

Model	GSK980TTi (W x H x D)	GSK980TTi-V (W x H x D)	GSK980TTi-H (W x H x D)
8.4-inch screen	420×260×150mm	292×422×150mm	400×200×150mm
10.4 inch screen	480×405×150mm	292×705×150mm	/

GSK 980TTi（8.4-inch）

GSK 980TTi-V（8.4-inch）

GSK 980TTi-H（8.4-inch）

GSK 980TTi（10.4-inch）

GSK 980TTi-V（10.4-inch）

Product packaging

FAQ

1. who are we?
We are based in Guangdong, China, start from 2012,sell to Domestic Market(99.00%),South Asia(1.00%). There are total about 51-100 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
cnc control,Controlle,Driver,Motor,5 axi cnc

4. why should you buy from us not from other suppliers?
At present, Denver CNC has set up a number of branches, offices and maintenance centers all over the country, and established a wide range of service support network to provide users with high-quality, efficient and fast technical services. In the developm

5. what services can we provide?
Accepted Delivery Terms: null；
Accepted Payment Currency:null;
Accepted Payment Type: null;
Language Spoken:null

GSK 980TTiNumerical control system of double channel lathe

GSK 980TTi
Numerical control system of double channel lathe