8.4 inch true color LCD monitor

Bus connection interface

with both horizontal and vertical shapes

Reserve U-disk interface for front end and RS232 serial communication interface for back end

16 operation panel IOs reserved at the back of the system

Provide differential external handwheel interface

Interpolation period, minimum control accuracy 0.1 μ m

Two feed axes and one CS axis are configured as standard, supporting dual spindle control and power cutter head control. Five feed axes are optional

The adaptive servo spindle can realize spindle orientation, rigid tapping, polar interpolation and CS contour control

Control axis: X axis, Z axis, Y axis, B axis, C axis; The C axis can be used as the Cs axis. Optional 5-axis 3-link;

nterpolation methods: positioning (G00), straight line (G01), circular arc (G02, G03)

Location Instruction Range: Metric:

Feed multiplier: 0~200% 21-level real-time adjustment

High cutting feed speed: 15000mm/min

Fast multiplier: F0, 25%, 50%, 100% four-stage real-time adjustment

Maximum speed: 60000 mm/min

Per feed: 0.01mm-500mmr (spindle encoder required)

Acceleration and deceleration mode: front acceleration and deceleration (straight line, S type) and back acceleration and deceleration (straight line, exponential type)

Electronic gear ratio: frequency doubling 1~65535, frequency dividing 1-65535

Pulse feed: 0.001, 0.01, 0.1mm three-step: 0.001, 0.01, 0.1, 1mm four-step

S2 digit (o gear control) / S5 digit (analog output)

Spindle encoder: the number of encoder lines can be set (100~99999g/r)

Transmission ratio between encoder and spindle: (1-255): (1-255)

Spindle magnification: 50% - 120%, a total of eight levels of real-time repair and adjustment

2 channels of 0V ~ 10V analog voltage output, supporting dual spindle control

-10V ~ 10V analog voltage output parameters are optional

Specify with address m and 2 digits, and the M function can be customized

Internal m instruction of the system (non redefinition): the program ends M02 and M30; Program stop M00: select Stop M01; Subroutine call M98; End of subroutine M99

Coolant start and stop, lubrication start and stop, MD automatic mode control chuck clamping and loosening, and control the advance / retreat of tailstock

Common thread (following spindle)

Single head / multi head metric and inch straight thread, taper thread and end face thread, equal pitch thread and variable pitch thread

The length, angle and speed characteristics of thread tailing can be set by program and parameters

Thread pitch: 0.001mm-500mm (metric system) 0.06 tooth inch ~ 25400 tooth / inch (British system)

Display: 8.4-inch digital screen

Display of machining track and preview of programming track

Using system a instruction format, there are 39 kinds of G codes, including fixed loop code and compound loop code

Support declarative macro programs (macro a, macro b)

Support level 5 subroutine call and user macro program call

Suitable tool rest: General Electric tool rest, Liuxin tool rest and DELTA servo tool rest

Tool change mode: MD automatic absolute tool change or manual relative tool change, forward rotation tool selection and reverse locking

Tool setting mode: fixed-point tool setting, trial cutting tool setting, return to mechanical zero point tool setting

Tool position signal input mode: direct input

Pitch error compensation: the compensation interval and compensation origin can be set, and one-way screw compensation or two-way screw compensation can be selected

 Reverse clearance compensation: fixed frequency or speed up and down compensation can be set, and different reverse clearance compensation is supported for G0 and G1

Tool compensation: 99 groups of tool length compensation and tool tip radius compensation

PLC processing speed: 1US per step; Up to 8000 steps; There are 10 basic instructions and 35 functional instructions

I / O unit input / output: 32 / 32, expandable

1-4 PMC axes can be selected