Number of control axes: 4 axes (X，Y，Z, A, B)

Number of linkage axes: 4 axes

Feed shaft function

Position instruction range: metric input (G21) : -9999.9999mm ~ 9999.9999mm, minimum instruction unit: 0.0001

Position command range: Inch input (G20) : -999.9999inch to 999.9999inch. Minimum command unit: 0.0001inch

Electronic gear: instruction frequency doubling coefficient 1 ~ 65536, instruction frequency division coefficient 1 ~ 65536

Fast moving speed: maximum 60m/min

Rapid rate: F0, 25%, 50%, 100% four levels of real-time adjustment

Manual feed rate: 0 ~ 150%, 16 levels of real-time adjustment

Feed rate: 0 ~ 150%, a total of 16 real-time adjustment

Hand wheel feeding: 0.001mm, 0.01mm, 0.1mm, 1mm four gears

Single step feeding: 0.001mm, 0.01mm, 0.1mm, 1mm four gears

Interpolation methods: linear interpolation, circular interpolation, spiral interpolation and rigid tapping

Automatic chamfering function

Acceleration and deceleration function

The system has a forward-looking function, up to 15 NC programs can be preread, so that small line interpolation high-speed
smooth, suitable for parts processing mold processing

Cutting feed: front acceleration and deceleration linear, front acceleration and deceleration S type, rear acceleration and deceleration linear, rear acceleration and deceleration exponential type

Fast moving: front acceleration and deceleration linear, front acceleration and deceleration S, rear acceleration and deceleration linear, rear acceleration and deceleration exponential

Manual mode and handwheel mode are after acceleration and deceleration control. Handwheel mode can be selected as immediate stop
mode or complete operation mode.

The start speed, end speed and time of acceleration and deceleration are set by parameters

Main function

2 channels 0 ~ 10V analog voltage output, support dual spindle control

1 way spindle encoder feedback, spindle encoder line number can be set (100p/r ~ 5000p/r)

Transmission ratio between encoder and spindle :(1 ~ 255) (1 ~ 255)

Spindle speed: can be given by S code or PLC signal, speed range 0r/min ~ 9999r/min

Spindle ratio: 50% ~ 120%, a total of 8 grades of real-time adjustment

Spindle constant line speed control

Rigid tapping

Function of cutting tool

Tool length compensation

Tool tip radius compensation (Type C)

Precision compensation

Pitch error compensation: compensation points, compensation interval, compensation origin can be set

Reverse clearance compensation: can be set to a fixed frequency or speed up and down to compensate the amount of reverse clearance machine

The PLC function

Two-stage PLC program, processing speed of 1.5μs/ step basic instruction; Maximum 4700 steps, level 1 program cycle 8ms

Number of instructions: 45 (including 10 basic instructions and 35 functional instructions)

Support PLC warning and PLC alarm

Support multiple PLC programs (up to 20), the current running PLC program can be selected

Basic I/O: 36 input /36 output

The man-machine interface

8.4-inch widescreen LCD with 800×480 resolution

Display in Chinese, English and other languages

Two dimensional tool path display

Real time clock

Operation management

Operation mode: edit, automatic, input, machine zero back, hand wheel/single step, manual, program zero back

Multi-level operation permission management

Alarm log

The program to edit

Program capacity: 56MB, 400 programs (including subroutines, macroprograms)

Edit function: program/program segment/word search, modify, delete, copy, paste

Program format: ISO code, support statement macro code programming, support relative coordinates, absolute coordinates and mixed coordinates programming

Program call: support macro program call with parameters, 4 levels of nested subroutines

Communications functions

RS232: parts program, parameters and other files two-way transmission, support PLC program, system software serial port upgrade

USB: U disk file operation, support PLC program, system software U disk upgrade

Safety features

Emergency stop

Hardware travel limit

Software trip check

Data backup and recovery