Product Details

Ⅰ.Main Technical Parameters and Characteristics of the Machine

Model	HD-2010M		HD-3020M		HD-4030M		HD-5040M
X/Y/Z measurement stroke	200×100╳200mm		300×200╳200mm		400×300╳200mm		500×400╳200mm
Z axis stroke	Effective space: 200mm, working distance: 90mm
XYZ axis base	Grade 00 green marble
Machine base	Grade 00 green marble
Size of glass countertop	250×150mm	350×250mm		450×350mm		550×450mm
Size of marble countertop	360mm×260mm	460mm×360mm		560mm×460mm		660mm×560mm
Bearing capacity of glass countertop	25kg
Transmission type	High precision cross drive guide and polished rod
Optical scale	High precision optical scale resolution: 0.001mm
X/Y linear measurement accuracy (μm)	≤3+L/200
Repetition accuracy (μm)	≤3
Camera	1/3″ HD color industrial camera
Lens	Fixed zoom lens, optical magnification: 0.7X-4.5X, image magnification: 20X-128X
Software function and Image system	Image software: it can measure points, lines, circles, arcs, angles, distances, ellipses, rectangles, continuous curves, tilt corrections, plane corrections, and origin setting. The measurement results display the tolerance value, roundness, straightness, position and perpendicularity. The degree of parallelism can be directly exported and imported into Dxf, Word, Excel, and Spc files for editing which is suitable for batch testing for customer report programming. At the same time, part of and the entire product can be photographed and scanned, and the size and image of the entire product can be recorded and archived, then the dimensional error marked on the picture is clear at a glance.
	Image card: SDK2000 chip image transmission system, with clear image and stable transmission.
Illumination system	Continuously adjustable LED light (Surface illumination +contour illumination), with lower heating value and long service life
Overall dimension（LWH）	1000×600×1450mm	1100×700×1650mm		1350×900×1650mm		1600×1100×1650mm
Weight（kg）	100kg	150kg		200kg		250kg
Power supply	AC220V/50HZ　AC110V/60HZ
Computer	Customized computer host
Display	21 inches
Warranty	1 year warranty for the whole machine
Switching power supply	Mingwei MW 12V

Ⅱ. Working Environment of Instrument

1. Temperature and humidity

Temperature: 20－25℃, optimal temperature: 22℃; relative humidity: 50％－60％, optimal relative humidity: 55％; Maximum temperature change rate in the machine room: 10℃/h; It is recommended to use a humidifier in dry area, and use a dehumidifier in humid area.

2. Heat calculation in the workshop

·Keep the machine system in the workshop operating in the optimum temperature and humidity, and the total indoor heat dissipation must be calculated, including the total heat dissipation of indoor equipment and instruments (lights and general lighting can be ignored)

·Heat dissipation of human body: 600BTY/h/person

·Heat dissipation of workshop: 5/m2

·Instrument placement space (L*W*H): 2M ╳ 2M ╳ 1.5M

3. Dust content of air

The machine room shall be kept clean, and the impurities greater than 0.5MLXPOV in the air shall not exceed 45000 per cubic foot. If there is too much dust in the air, it is easy to cause resource read and write errors and damage to the disk or read-write heads in the disk drive.

4. Vibration degree of machine room

The vibration degree of machine room shall not exceed 0.5T. Machines that vibrate in the machine room shall not be placed together, because the vibration will loosen the mechanical parts, joints and contact parts of the host panel, resulting in abnormal operation of the machine.

Ⅲ. Power Supply AC220V/50HZ　AC110V/60HZ