HST Jinan manufactures electronica utm Plastic sheet tensile test machine

 

Main Unit Feature:

1.Adopt single column structure, lower for tensile, upper for compression, double space. The beam is stepless lifting, light but rigid.

2.Adopting ball screw drive, realize no clearance transmission,make sure the precision control of the test force and deformation speed.

3.The photoelectric encoder is the displacement sensor, with high resolution, strong anti-interference ability.

4.The shiel plate with limit mechanism used to control the beam moving range, in order to avoid sensor damaged due to the moving distance is too large.

5.The table, moving beams is made of high quality precision machining steel plate, not only reduce the vibration generated by specimen fracture, but also improve the stiffness.

6.The motor tail is upwards, above the work surface, this design makes the main unit lower space narrowing, the whole machine is more coordinating, and more easy to spread out the heat generated by the motor rotation, extend electrical components life.

7.Three columns of mandatory orientation, make the main unit rigidity much improved, to further ensure the repeatability of measurement.

8.Adopt bolt type grip installation, make the grip replace easier.

 

Model	WDS-50	WDS-100
Max. load(kN)	50	100
Test speed(mm/min)	0.05-500	0.05-500
Tensile space(mm)	700(can be customized)
Compression space(mm)	700(can be customized)
Test width(mm)	500(can be customized)		550(can be customized)
Workbench thickness(mm)	58		68
Base height(mm)	435		460
Dimension(mm)	850*480*1865		1000*550*2076
Structure	Four-column floor or desk model, (upper is compression and lower is tensile)
Cover	All aluminum alloy
Control method	Single chip control
Load accuracy	ISO 7500,Class1
Load range	2%~100%F·S
Displacement resolution	0.04um
Control method	Single chip control
Power supply	AC220V±10%,50Hz(can be customized)
Grips	Wedge type, plate type and other grips as consumer’s demand