Compression testing machine for Compressive Properties of Rigid Plastics with ASTM D695 and ISO 604

How to use this machine ?

Specimens are placed in the grips of a Universal Test Machine at a specified grip separation and pulled until failure. For special standard the test speed can be determined by the material specification or time to failure. An extensionmeter or strain gauge is used to determine elongation and tensile modulus if need. Depending upon the reinforcement and type, testing in more than one orientation may be necessary.   

 

1. Application:

WDW series computerized electronic universal testing machines are designed and manufacture

according to ASTM, ISO, DIN, GB and other international standards. Applicable for wide range of material for tension, compression, bending, shearing and low cycle test. Suitable for metal, rubber, plastic, spring, textile, and components testing. It is widely used in the corresponding industries, research 

and development, test institutes and training centers etc.

 

2. Main Specifications:

Model	WDW-100	WDW-100E
Max. Load(kN)	100	100
Structure	Four-column floor or desk model, (upper is compression and lower is tensile)
Cover	All aluminum alloy
Control method	Computer control
Load accuracy	Class 1	Class 0.5
Load range	2%~100%F·S	0.2%~100%F·S
Load resolution	1/300000
Rang of deformation	4%-100%FS
Resolution of deformation	0.04um
Accuracy of displacement	Within±0.5%of indicating load
Resolution of displacement	0.01mm
Test speed(mm/min)	0.05-500 stepless arbitrary setting
Tensile space(mm)	700(can be customized)
Compression space(mm)	700(can be customized)
Test width(mm)	550(can be customized)
Workbench thickness(mm)	68
Base height(mm)	460
Working environment	Room temperature 10℃~30℃,relative humidity≤80%
Power supply	AC220V±10%,50Hz/60Hz(can be customized)
Grips	Wedge type, plate type and other grips as consumer's demand
Dimension(mm)	1000*550*2076