Computer Control Instrumented (oscilloscope) Impact Tester Equipment Impact Tester Testing Machine

 

 

 

 

 

1. Brief introduction:

 

The machine is designed in accordance with ISO14556: 2000 "Steeel-charpy V-notch pendnlum impact test-Instvumented test method"; GB/T19748-2005 "Metal Charpy V-notch pendulum impact test instrumentation test method"; GB/T3808-2002 Developed relevant requirements in "Inspection of Pendulum Impact Tester".

 

By testing the impact force value, collecting and analyzing the impact process data, and drawing the energy change curve, the physics meaning and explanation are given at different stages of material fracture, which provides detailed and accurate data for studying and analyzing the behavior of the material fracture process.

 

2. Standard:

 

2.1.GB/T19748-2005 "Steel Charpy V-notch pendulum impact test (instrumentation) method"

2.2.ISO 14556: 2000 (E) "Steel-Charpy V-notch bending impact test-instrumental test method"

2.3.ASTM E23 "Steel Charpy V-notched pendulum impact test instrumentation method"

2.4.GB/T3808-2002 "Pendulum Impact Test Machine",

2.5.JJG145 "Verification Regulation of Pendulum Impact Tester"

 

  

3. Main Technical Specifications:

 

Model	JBW-150H	JBW-300H	JBW-500H
Control type	Computer control
Max energy	150J	300J	500
Impact speed	5.24m/s		5.4m/s
Pendulum pre-lift angle	150°
Angle accuracy	±0.1°
Specimen support span	40+0.2mm
Support jaw fillet	R1.0~1.5mm
Impact blade	Izod impact blade,tensile impact blade,R2,R8
Impact knife angle	30°
Impact blade thickness	16mm
Distance from pendulum center to impact point	750mm
Standard sample size	10×10(7.5 or 5)×55mm
Load cell accuracy	≤±1%FS
Impact pendulum configuration	150J pendulum	150J and 300J pendulum	250J and 500J pendulum
Power supply	380V/50Hz /Three-phase four-wire